Isover U Protect Wired Mat 4.0 Alu1

Isover U Protect Wired Mat 4.0 Alu1 is a lightweight and easy to install Ultimate™ mineral wool wired mat. It combines all the advantages of conventional thermal insulation with Euroclass A1 fire classification and is a component of the U Protect System.

The Isover U Protect system has been tested in accordance to EN 1366-1 and EN 1366-8 and assessed against the criteria in BS 476: Part 24. It offers up to 2 hours passive fire protection in HVAC ventilation and smoke extract ducts as well as up to 1 hour passive fire protection for kitchen ducts.

The fire resistance is also dependent on the application, thicknesses of insulation and the method of installation.

Please contact isover.technical@saint-gobain.com for further details.

Product Features:

• Ultimate™ mineral wool roll incorporating a galvanised steel grid and a black aluminium foil facing.
• Supplied in 30-120mm thicknesses.

Fire Classification:

Euroclass A1 Reaction to Fire classification according to EN 13501-1.

Product Benefits:

• Fire Protection - The Isover U Protect system has been tested in accordance to EN 1366-1 and EN 1366-8 and assessed against the criteria in BS 476: Part 24. It offers up to 2 hours passive fire protection in HVAC ventilation and smoke extract ducts as well as up to 1 hour passive fire protection for kitchen ducts.¹
• Ease of Install - The Ultimate™ wired mats offer a lightweight solution compared to traditional stone wool options, ensuring ease of handling and installation, as well as reducing the stress on supporting structures. Their flexibility and mechanical strength allows fast and efficient cutting and fitting. The adhesive used in the system is only required at penetration details rather than at every insulation joint.
• Fire Classification - Achieves a Euroclass A1 Reaction to Fire classification, according to EN 13501-1.
• Thermal Performance - Offers energy savings through helping to control temperatures and reduce heat loss or gain within ductwork.      

¹ Fire resistance is dependent on the application, thicknesses used and method of installation.            

The system includes a range of accessories (intumescent paint, glue, screws and tape) to ensure the correct installation of the Isover U Protect system. For further details, please visit isover.co.uk/hvac-insulation/duct-insulation-fire-protection or contact isover.technical@saint-gobain.com

Key Considerations:

When using Isover U Protect Wired Mat 4.0 Alu1, you need to satisfy yourself that use of the product meets all relevant national Building Regulations and guidance as well as local, national and other applicable standards relevant for your construction or application, including requirements in relation to fire.

Please refer to the following product documents:

• Product Datasheet
• Declaration of Performance
• Safe Use Instruction Sheet