INTRAgrille Architectural Grilles - T5050/R

Name: INTRAgrille Architectural Grilles - T5050/R
Brand: oVCgyohACo7kXeNtwxuDAz
SKU: 3CLnceHD3NLTtocjjNUNdd

INTRAsystems

Architectural grille with a 5 x 5 mm top profile.

Jump to:

+44 (0)1425 472000 www.intrasystems.co.uk

Application

Recommended for trench covers, entrance grilles, ventilation and drainage.

Description

Architectural grille available in a variety of materials and bespoke finishes, for interior and exterior applications.

Features and benefits:

Available in stainless steel 1.4301 (304) and 1.4401 (316) grades, and carbon steel.

The profile and support spacing can be adjusted to achieve appropriate load bearing, airflow and screening.

Linear aesthetic with no visible seams.

100% recyclable and sustainable material.

Can be cut and shaped to nearly any shape and format.

Drainage options available.

Can be pickled and passivated, electroplated, powder coated to any standard RAL colour or shot peened (stainless steel only).

Applications:

Recommended for trench covers, entrance grilles, ventilation and drainage.

General information

Material	Carbon steel Stainless steel, grade 1.4301 (304) Stainless steel, grade 1.4401 (316)
Finish	Not applicable For carbon steel. Electropolished Pickled and passivated Powder coated Insert RAL colour requirement. Shot peened

Uniclass 2015	Pr_25_71_42_70 Raised access floor panelsPrimary
CAWS	L30/30 Proprietary L30/310 Proprietary L30/45 Ramps/ Walkways L30/460 Walkways N10/300 Entrance matting P31/370 Access covers/ gratings for Q10/180 Drainage channel systems with gratings

Specification data - Raised access floor panels

Product Reference	INTRAgrille Architectural Grilles - T5050/R
Profile	Grilles can be made to nearly any shape and format to suit any project, consult manufacturer and insert requirements.
Size	-
Module	Insert requirement, consult manufacturer for information.
Slot opening	4 mm Standard. Special order Insert requirement.
Support profile spacing	50 mm Standard. Special order Insert requirement.
Material	Carbon steel Stainless steel, grade 1.4301 (304) Stainless steel, grade 1.4401 (316)
Support profile	10 x 2 mm 300 mm maximum span. 20 x 2 mm Not available with stainless steel, 650 mm maximum span.
Finish	Not applicable For carbon steel. Electropolished Pickled and passivated Powder coated Insert RAL colour requirement. Shot peened
Fixings	Insert requirement, hinged, framed and bespoke fixings available.
Drainage	Insert requirement, consult manufacturer for information.

Standard product features

Top profile:

Size (w x h): 5 x 5 mm.

Open area: 44% (based on 4 mm slot opening).

Support profile weight:

Dependent on size and material, consult manufacturer's literature for information.

Product Options

Support profile spacing:

Can be adjusted to achieve appropriate load bearing and aesthetic requirements, consult manufacturer's literature for information.

Slot opening:

Available ˃4 mm. Can be varied within a single grid with options for constant, increasing or alternating spacing for different visual effects or to control the degree of screening and airflow.

Maximum span:

Consult manufacturer's literature for information.