NBS Source
List your products

This product is no longer available

Application

Primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidized and slightly damp surfaces. Interzone 954 has also found extensive use in a number of other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates. Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

Description

A two component, low VOC, high solids, modified epoxy barrier coat designed to give long term protection in a single coat application. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

Applications:

Primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidized and slightly damp surfaces. Interzone 954 has also found extensive use in a number of other corrosive environments including pulp and paper plants, chemical plants, jetties and sluice gates. Interzone 954 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.

General information
Specification data - Barrier coatings
Product Reference

Interzone® 954

Colour

A wide range is available; consult manufacturer's literature and insert details.

Product Options

Technical details:

  • Gloss level: Gloss.
  • Typical thickness: 250–500 microns dry; 294–588 microns wet.

Compatibility:

Interzone 954 will generally be applied to bare steel prepared by dry abrasive blasting, wet abrasive blasting or ultra high pressure hydroblasting. The following primers are recommended for Interzone 954:

  • Intercure 200.
  • Intercure 200HS.
  • Intergard 251.
  • Intergard 269 (for underwater use).
  • Interline 982 (for underwater use).
  • Interzinc 52.
  • Interzinc 315.
  • Interzone 1000.

The following topcoats are recommended for Interzone 954:

  • Interfine 629HS.
  • Interfine 878.
  • Interfine 979.
  • Intergard 740.
  • Intersleek 167.
  • Interthane 870.
  • Interthane 990.
  • Interzone 954.

For other suitable primers/topcoats, consult International Protective Coatings.