Low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.
For application to a wide variety of substrates including hand prepared rusty steel, abrasive blast cleaned and hydroblasted steel, and a wide range of intact, aged coatings.
Interseal 670HS is suitable for overcoating intact, aged alkyd, epoxy and polyurethane systems. However, this product is not recommended where thermoplastic coatings such as chlorinated rubbers and vinyl have previously been used. Consult International Protective Coatings for alternative recommendations. Interseal 670HS can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface.
A high solids, low VOC, two component, high build, surface tolerant epoxy coating, providing anticorrosive protection in industrial and offshore environments in both atmospheric exposure and immersion service.
Features and benefits:
Wide range via the Chromascan system, consult manufacturer for options.
Aluminium is eggshell.
Surface tolerant epoxy.
G10/630 Galvanizing plus site-applied
G10/635 Thermally sprayed zinc coating plus site-applied
G10/638 Shop priming
G10/640 Shop painting
G10/643 Protective painting
G10/65 Shop priming for
G10/650 Site painting
G10/660 Shop plus site painting
G12/20 Shop priming
G12/330 Proprietary metal members
G12/650 Shop priming
Applying coating system.
Wet film thickness (minimum)
Dry film thickness
Interseal 670HS will normally be applied to correctly prepared steel substrates.