A two component epoxy zinc phosphate/ micaceous iron oxide primer.
Suitable for use as a primer for steelwork intended for use in a wide range of aggressive environments, including offshore, chemical and petrochemical plants, industrial buildings, pulp and paper mills, power plants and bridges.
Suitable for overcoating within three hours in most climatic conditions, hence speeding up production and throughput in fabrication shops. Can also be used on site as a rapid curing maintenance coating.
Intercure 200 can also be used as a primer for substrates other than blasted steel, e.g. stainless steel, alloys etc. Consult International Protective Coatings for further details.
Intercure 200 is not intended for use as a primer for steelwork which may be subjected to immersion conditions.
Formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions.
G10/630 Galvanizing plus site-applied
G10/635 Thermally sprayed zinc coating plus site-applied
G10/638 Shop priming
G10/640 Shop painting
G10/643 Protective painting
G10/65 Shop priming for
G10/650 Site painting
G10/660 Shop plus site painting
G12/20 Shop priming
G12/330 Proprietary metal members
G12/650 Shop priming