Insulated Roller Shutter

Application

Suitable for loading bays, factories, warehouses, boiler or turbine halls; television or recording studios, and any applications where security is required together with thermal insulation, strength and robust design.

Description

Thermally insulating and sound reducing roller shutter accredited to BS EN ISO 10140-2:2010. 


Features and benefits:

  • Curtain: constructed from 100 mm flat galvanized insulated steel laths, with end locks fitted to alternate laths to prevent lateral movement.
  • Bottom rail: fabricated from the bottom lath with a galvanized steel trim section, and fitted with a rubber weather strip.
  • Guides: the side guides are formed from galvanized steel with twin brush strips, and prepared for fixing to the opening structure by means of continuous fixing angles.
  • End plates: fabricated from carbon steel of adequate thickness relative to door size, and supplied with angles for fixing to the structure.
  • Roller: the roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection, and is mounted on bearings or cups on each end plate.
  • Operation: electrical operation is by means of a direct-drive, three-phase geared motor mounted on the outside of one end plate. The motor has an inherent safety brake, thus meeting all relevant health and safety requirements, and the standard unit is pre-wired, obviating the need for a site electrician.
  • Controls: the standard method of control is by means of internal, wall-mounted push-button control. Other types of control (including key switches, etc.) are available at extra cost.
  • Casings: coil casings fabricated from galvanized steel sheet are available as an optional extra.

General information

Size

Manufactured to suit Client opening sizes.


Up to 10m clear opening width by 10m clear opening height.


Please discuss with our sales team if there is a requirement beyond these sizes.

Bespoke; consult manufacturer for details and insert requirements.

Finish

Galvanized

Standard.

Powder-coated

Optional.

Material

Carbon steel

Shape

Rectangular

Square

WarrantyDescription

12 months

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary
Pr_30_59_57_76 Security shutters

CAWS

L20/610 Roller shutters/ curtains

Product range

Roller Shutters

Specification data - Roller shutters Enhanced data

Standard

BS EN ISO 10140-2:2010.

Opening sizes

Insert requirement, available up to 10 x 10 m as standard (clear width x clear height), significantly greater sizes available.

-

Format

Thermally insulating and sound reducing.

Arrangement

Vertical, face-fitted across opening.

Vertical, fitted into reveal.

Performance

-

Resistance to wind load

To BS EN 12424, class 5.

Acoustic performance

18 dB Rw.

Thermal resistance

1.1 W/m²K.

(3.2 W/m²K at quirks)

Shutter curtain.

-

Lath material

Carbon steel.

With bonded foam

Profile

Flat.

95 mm deep.

Finish and colour

Galvanized.

Standard.

Polyester powder-coated.

Insert requirement.

Frame and guides

-

Material

Carbon steel.

Finish

Galvanized.

Standard.

Polyester powder-coated.

Colour

Insert RAL colour requirement, or type 'Not applicable' for Galvanized.

Choice of RAL/ plastisol colours.

Operation

-

Mode

Automatic.

Electrical via a 400 V nominal, three-phase, direct drive geared motor with integrated safety brake.

Control

Low level control panel with constant pressure open/ close/ stop push-buttons mounted adjacent to the shutter.

-

Hardware

Control Panel with open/ close/ stop push buttons.

Accessories

Building management system (BMS) linkage.

Card reader.

Double-glazed vision panels.

Light curtain.

Photocells.

Radar.

Status indicator.

Timer delay closure.

Execution

Installing hardware

Product Reference

Insulated Roller Shutters

Size

Manufactured to suit Client opening sizes.


Up to 10m clear opening width by 10m clear opening height.


Please discuss with our sales team if there is a requirement beyond these sizes.

Bespoke; consult manufacturer for details and insert requirements.

Weight

45 kg/m².

Approximately.

Environmental information

Contains Red List materials

No

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Literature

Insulated Roller Shutter - Thermally Insulating and Sound Reducing Roller Shutter

Insulated Roller Shutter - Thermally Insulating and Sound Reducing Roller Shutter

Similar products from Bolton Gate Company

Acoustic Roller Shutter - Sonaroll

Acoustic Roller Shutter - Sonaroll

Horizontal Roller Shutters

Horizontal Roller Shutters

Security Shutter - Electrically Operated Roller Shutters (3 phase)

Security Shutter - Electrically Operated Roller Shutters (3 phase)

Single Phase Electric Roller Shutters

Single Phase Electric Roller Shutters

Smokebarrier D120 Curtain

Smokebarrier D120 Curtain