Insulated roller shutter doors designed to be installed inside or outside the clear opening
Ideal for high traffic areas.
The panel design incorporates an insulating thermal foam infill which conserves heat and also effectively reduced noise. Draught insulation is provided by twin brush seals located in the guides, which seal both faces of the curtain and a rubber seal seals the bottom panel of the door to the floor reducing airflow around the curtain. This combination provides higher performance and reduced fuel bills.
Designed to cut space requirements to a minimum. It requires very little headroom above the opening, an important feature and major advantage for buildings where due to structural features there is restricted or limited available space. No overhead tracks or support steel, the advance motor drive eliminates the need for complicated counterbalance springs.
Features and benefits:
Insert BS or RAL colour.
Powder Coat Finish
L20/610 Roller shutters/ curtains
Designed to provide a hollow section panel with CFC and HCFC free thermal infill. Each panel section is 100mm deep with twin-ribbed face for rigidity.
Frame and guides
Galvanized or silver painted guide welded to 100 x 65 x 7 mm slotted fixing angles in galvanized finish, guides fitted with twin co-extruded brush seals on both sides.
Standard. Other controls available. Consult manufacturer and insert requirement.