illbruck ME317 Internal Membrane Tape
Verified by manufacturer 22 days ago
Single-sided adhesive reinforced paper membranes tape.
Application
For the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use. Can also be used to seal joints in OSB boards and as an air-seal tape for penetrations.
Description
A reinforced, single-sided, kraft paper tape with modified acrylate dispersion, solvent-free adhesive. Primers AT140 or ME901 are recommended on porous or damp substrates or at low temperatures.
Usually primerless adhesion to most common substrates which should be dry, grease , dust and debris free. Consolidate the bond by applying pressure with a stout seam roller by rolling over the top of the tape where there is a solid surface underneath.
Features and benefits:
- Fully compatible with all internal illbruck building protection products.
- Strong kraft paper.
- Easy to tear off by hand.
- Quick and easy application.
For Technical Data Sheets and Safety Data Sheets, please refer to the illbruck website Download Centre.
General information
Color | Yellow |
Length | 40000 mm |
Width | 60 mm |
Warranty description | Manufacturer guidanceAny product which has been applied (a) in accordance with Tremco CPG UK Ltd written instructions and (b) in any applications recommended by Tremco CPG UK Ltd, but which is proved to be defective, will be replaced free of charge. |
Uniclass | |
CAWS | H92/780 Air and vapour control layer H92/785 Breather membrane P10/310 Air and vapour control layer P10/320 Breather membrane P10/60 Air and vapour control layer P10/65 Breather membrane |
Product range |
Specification data - Polymer-based adhesive sealant tapes
Material | Reinforced kraft paper with solvent-free modified acrylate dispersion adhesive. |
Colour | Yellow. |
Service temperature | -40 to +100°C. |
Application temperature | 5–40°C. |
Roll size | 40 000 x 60 mm. |
Execution | Manufacturer guidanceAs per manufacturers' Technical Data Sheet. Primer AT140 is required when applying to concrete floor and soffit slabs. Apply the tape wrinkle and bubble free, do not stretch the tape when applying. Apply in pre-cut short over lapping sections or continuously direct from the roll. |