BBA Agrément Certificate
Icopal Universal consists of a POCB (polyolefin copolymerisate binder) reinforced with glass fibre and polyester. The result is a strong, flexible, and extremely stable single layer roof covering that is UV resistant and tough.
Icopal Universal can be applied rapidly to insulation materials, timber, concrete or profiled metal roofs, or to existing bituminous roofing systems. The three variations of Icopal Universal meet a wide range of applications:
Icopal Universal does not require open flame, making it extremely safe to apply. The thin fleece of polypropylene used to prevent rolls from sticking together also makes Icopal Universal easy to use.
Icopal Universal has an expected lifetime of up to 30 years, yet remains easy to remove and recycle at the end of its useful life. In addition, the thin design results in the minimal use of raw materials in manufacture and energy for transportation.
Mechanically Fastened System:
The Universal mechanically fastened system relies on the use of fasteners and pressure plates installed at pre-determined centres within the overlap to attach the roofing system to the structure. The system offers fast application time, instant seam strength and reduced impact associated with inclement weather conditions. Icopal Universal POCB membrane is mechanically attached through to the structural deck using Monarplan Tubular Fasteners of appropriate length. The fasteners are required to penetrate through the structural deck with a minimum projection to the underside of 25 mm.
Fully Adhered System:
Icopal Universal POCB adhered system offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical.
Icopal Universal POCB adhered system offers an ideal solution on very complex building shapes or where drilling and mechanical fasteners are inappropriate or impractical but can support the increased loading from the ballast material.
J42/110 Warm deck roof covering
Icopal Universal POCB Warm Deck Roofing System
Icopal S.A. Primer
Quick drying primer for self-adhesive membranes.
Vapour control layer
Micoral NB vapour control layer
Heat-activated/ self-adhesive bituminous vcl. For mechanically fastened systems only.
Monofilament 250 vapour control layer
Loose-laid polyethylene vcl (low-med humidity).
Reflex 275 vapour control layer
Loose-laid polyethylene vcl (med-high humidity).
TorchSafe T.A. VCL - Sand
Thermically-activated/ self-adhesive bituminous vcl.
Adhered with Icopal Insulation Adhesive
Mechanically fastened, with fixings as clause 355
Icopal Universal POCB single-layer membrane
Icopal Universal WS POCB single-layer membrane
Root retardant for beneath green roofs.
Adhered with Icopal PUR Spray Contact Adhesive
Mechanically fastened, with Icopal Tubular Washers and fixings as clause 355
Roofgard Universal Cable and Tube Duct
Roofgard Universal Cowled Telescopic Vent
Roofgard Universal Lightning Conductor Pads
Roofgard Universal Outlets
Roofgard Universal Parapet Outlet
Consult with Icopal Ltd for details of the preparation and priming of the intended roof structure and substrate and for details of the requirements for preparation layers, venting layers, nailing layers and taping strips.
Consult Icopal Limited’s technical literature for details and guidance. Icopal Limited are also able to offer a design and specification service and it is recommended that they are consulted early in the design process.