Verified by manufacturer 20 days ago
ISO 9001 Quality Management
Highly visible protection bollard for demarcation and safety.
Suitable for industrial and commercial environments, IAE’s PlasProtek Plastic Bollard is particularly suitable for protecting pedestrian walkways and equipment.
The plastic sleeved steel core bollard provides a highly visible barrier which reduces the risk of both physical injury to staff and damage to machinery.
The bollards are suitable for use in warehouses, manufacturing facilities and distribution centres.
IAE’s PlasProtek Bollard is a plastic sleeved steel core unit for protecting pedestrian zones and equipment.
The PlasProtek bollard unit is made up of a tubular steel core welded to a bolt down base plate, with a removable LDPE plastic cover sleeve.
The tubular steel core is 76 mm diameter circular hollow section.
The cover sleeve is 1200 mm high and 183 mm in diameter.
These dimensions leave an air gap between the steel core and outer sleeve that allows a measure of shock absorption, so that light impacts don't damage the centre core or the ground fixings, requiring expensive replacement and repair work.
The sleeve is left loose to rotate freely around the core allowing glancing blows roll off without damaging the inner core.
The sleeve is bright yellow and includes 2no. black bands for maximum visibility.
If the sleeve is scratched or damaged, it can be simply slid off and replaced with a new one.
The bollards are typically used in groups either along pedestrian walkways to highlight and define pedestrian zones or around machinery and equipment. They can also be used near doorways and against structural columns and racking to highlight edges and guard against impact.
The bollards are an effective way to minimise the risk of injury to workers and minimise the risk of damage to equipment and buildings.
Specifying IAE’s PlasProtek Bollard:
The PlasProtek Bollard is an exclusive product to IAE’s Industrial Fit Out Division.
The bollards are produced in high volume and have been installed in facilities across the UK.
Low density polyethylene (LDPE)
Low density polyethylene.
Tubular steel core.
Size and profile
Steel core: 76 mm diameter; Cover sleeve: 183 mm diameter.
Base plated for bolt down.
Baseplate, 250 x 250 mm.
Black vinyl strips.
Contains Red List materials
Country of product manufacture
Highly recyclable carbon steel core
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.