Hyload Original DPC
BBA Agrément Certificate
Certificate type
High performance flexible polymeric damp-proof course (DPC) for use within masonry walls.
For use as a horizontal, vertical or stepped damp proof coursing system and is also suitable for the on-site creation of cavity trays within masonry cavity wall construction.
High performance flexible polymeric damp-proof course (DPC) for use within masonry walls to prevent passage of moisture from the ground and at all levels as a cavity tray to prevent the downward movement of water.
Features and benefits:
- Available in a range of widths.
- Does not extrude under compressive load, under normal working conditions.
- Robust – resistant to impact damage, under normal working conditions.
- Durable – will remain effective for the design life of the building, under normal working conditions.
- Supported by a range of accessories and is compatible with the complete range of Hyload damp-proofing products, as well as most commonly used construction materials.
- CE Marked.
- BBA approved.
Applications:
For use as a horizontal, vertical or stepped damp proof coursing system and is also suitable for the on-site creation of cavity trays within masonry cavity wall construction.
Uniclass 2015 | |
CAWS | F30/320 Damp proof courses – plastics F30/345 Site formed flexible sheet cavity trays – plastics F30/46 Damp proof course – plastics F30/52 Site formed flexible sheet cavity trays |
Product Reference | Hyload Original DPC |
Roll width | Insert requirements; available in widths 100–1000 mm. |
Pre-formed cloak units | Not requiredType 2, change of level (right-hand unit)Type 3, stop end brick/ block, surface fixed (right-hand unit)Type 5, internal corner, surface fixedType 6, external corner, surface fixedType 7, internal/ external corner brick/ blockType 8, internal cornerType 9, external cornerType 10, column stop end brick/ block, surface fixed (right-hand unit) |
Accessories | Not requiredHyload DPC fixing pins for insulationHyload DPC fixing pins for masonryHyload DPC fixing stripHyload DPC jointing tapeHyload DPC lap adhesiveHyload DPC joint support boardHyload DPC mastic |
Standard product features | Technical characteristics:
|
Product Options | Roll width: Non-standard widths are available to order in 25 mm increments. Accessories: - Hyload DPC fixing pins for insulation: Corrosion-resistant rigid plastic strip, used specifically to provide surface fixing solutions in cavity tray formation. 29 mm wide x 2 mm thick x 2 m long. - Hyload DPC fixing pins for masonry: Corrosion-resistant pins for surface fixing IKO Hyload high performance DPC systems to any solid internal substrate such as brick, stone and concrete. - Hyload DPC fixing strip: Corrosion-resistant and can be used for surface fixing to the rigid insulation of composite inner skins. - Hyload DPC joint support board: Twin-walled polypropylene reinforced support board which can be bent to form the required profile. - Hyload DPC jointing tape: Black, double-sided bituminous tape in 100 mm x 10 m rolls, used for bonding overlaps in DPC material and DPC to IKO Hyload pre-formed cloak units. - Hyload DPC lap adhesive: Brush applied synthetic rubber resin mixture for bonding laps in DPC or DPC to IKO Hyload pre-formed cloak units. - Hyload DPC mastic: Thick synthetic rubber mastic adhesive with gap filling properties up to 6 mm. |