Hydroprufe 3000
Application

Used for internal and external tanking of underground structures, reservoirs, car park and roof decks, subways, lift shafts and retaining walls. It is satisfactory for use as a waterproofing membrane for type A basement constructions grades up to and including 3 as defined in Table 1 of BS 8102.

Description

High performance, cold applied waterproof membrane, manufactured from tough, cross-orientated HDPE film to a layer of rubber modified bitumen adhesive. The advanced backing film gives improved technical performance on tear strength and tensile strength, puncture resistance and dimensional stability. It also offers good conformability for site application.

Features/ Benefits:

  • Rapid and easy cold application.
  • Flexible and accommodating giving excellent bond to substrate.
  • Non-Hazardous and resistant to dilute acid and alkalis.
  • High performance protection against surface and ground water and soluble salts.
  • Capable of resisting a 6 metre head of water when fully supported.

Applications:

Used for internal and external tanking of underground structures, reservoirs, car park and roof decks, subways, lift shafts and retaining walls. It is satisfactory for use as a waterproofing membrane for type A basement constructions grades up to and including 3 as defined in Table 1 of BS 8102.

Priming:

Porous surfaces should be primed with Hydroprufe Primer.

Ancillary components:

Can be used with the following to create a complete membrane solution:

  • Hydroprufe Corner Piece.
  • Hydroprufe Top Hat.
  • Protection Board 600.

General information

Uniclass 2015

Pr_25_57_08_08 Bitumen sheetsPrimary

CAWS

J40/190 Self-adhesive bitumen damp proofing/ tanking

J40/40 Self-adhesive bitumen damp proofing

Specification data - Bitumen sheets Enhanced data

Product Reference

Hydroprufe 3000

Standard product features

Roll size:

1.05 x 19.05 m.

Technical properties:

  • Membrane strength (to ASTM D1000): 5 MPa.
  • Elongation (to ASTM D1000): 300%.
  • Puncture resistance (to ASTM E154): 230 N.
  • Adhesion (180° peel, to ASTM D1000): 4 MPa.
  • Water vapour transmission (to ASTM E96): 0.3 g/m²/day.
  • Water penetration at joint (to MOAT 275.1.4): Nil.

Third party certifications
  • Certificate: 12/4922