NBS Source
List your products
HAWA Variofold 80 GV
Application

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.

Description

Door hardware for all-glass folding walls, for panel weights up to 80 kg. Panel width: 400–900 mm. Maximum panel height: 2600 mm. Suitable for door panel thickness of 10–12.7 mm.

Requires a bottom guide channel, (apart from sets comprising only two panels). Manufacturer recommends installation of even numbers of panels only.

Features and benefits:

  • Elegant design.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Smooth, quiet operation.
  • Minimal stacking space required.
  • Includes a secure locking mechanism.
  • Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • An access door equipped with our top pivot may also be added on the opposite side to the folding stack.
  • Compatible for use with sliding doors: Fully tempered monolithic glass (of 10, 12 and 12.7 mm thickness) and fully tempered laminated glass, and fixed doors: Fully tempered monolithic glass (of 12 and 12.7 mm thickness) and fully tempered laminated glass (of 10.8–13 mm thickness).
  • All mechanisms, suspension devices, guides and locks are fully integrated into the aesthetically pleasing suspension and glass retainer profiles.
  • Vertical adjustment (±3 mm).

Components:

Quantities of each component will vary dependent on variant specified - consult manufacturer for details.

  • Four-wheeled trolley, M10, with plastic wheels.
  • Four-wheeled trolley, M10, with plastic wheels and spacer.
  • Top pivot bearing.
  • Vertically adjustable driver for pivot door.
  • Folding/ pivot door catch, adjustable.
  • HAWA bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot (standard).
  • Guide, rattle proof, plastic, 14 mm, with suspension block.
  • Vertical adjustment key SW 19.
  • Suspension assembly locking wrench SW 10/11.
  • Fork spanner SW 22/12, pivot door vertical adjustment.

Applications:

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.

General information
Uniclass 2015
Pr_30_36_36_23 Door track and running gearPrimary
CAWS

P21/10 Quantities and locations

P21/350 Door track and running gear

Specification data - Door track and running gear
Product Reference

HAWA Variofold 80 GV (16780)

Set for two panels.

HAWA Variofold 80 GV (16781)

Set for two panels and pivot panel.

HAWA Variofold 80 GV (16782)

Set for four panels.

HAWA Variofold 80 GV (16783)

Set for four panels and pivot panel.

HAWA Variofold 80 GV (16784)

Set for six panels.

HAWA Variofold 80 GV (16785)

Set for six panels and pivot panel.

Installation/ Design

As drawing

Insert requirements, various possibilities available. Consult manufacturer for details.

Running track

6000 mm

Cut to size

Insert requirements.

Bottom guide channel

6000 mm

Cut to size

Insert requirements.

Suspension/ Retainer profile -
Type

Aluminium, plain anodized, brushed

Aluminium, plain anodized, brushed (straight)

Aluminium, un-anodized

Length

6500 mm

Cut to size

Insert requirements.

Hinges

Zinc alloy, dull chromium finish

Zinc alloy, dull chromium finish (straight)

Zinc alloy, raw finish

Locking

HAWA bar bolt lock with retention pin, 17 mm profile cylinder

On request. Available with floor mounted sleeve or strike plate, insert requirements.

HAWA bar bolt lock with retention pin, 22 mm round cylinder

On request. Available with floor mounted sleeve or strike plate, insert requirements.

HAWA bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot

Standard. Available with floor mounted sleeve or strike plate, insert requirements.

Accessories/ Other requirements

Not required

Additional top lock

Brush seal for glass suspension and retainer profile

Cover cap

Available in dull chromium or raw finish. Insert requirement.

Drilling jig, for hinge retention bolts

Fork spanner to glass holder insert

Glass cutouts

Various configurations available, consult manufacturer's literature and insert requirements.

Installation tool for blocking keys

For 10–12.7 mm glass.

Long connecting rod

For door heights over 2500 mm.

Set of glass fixing parts

Short connecting rod

For door heights up to 2500 mm.

Surface treatment of suspension and glass retainer profiles

Thrust bearing

For fitting into bottom guide channel.

Thrust bearing sleeve

For pivot door.

Standard product features

Configuration:

Sliding/ stacking, folding.

Product Options

Product references:

Maximum widths:

  • HAWA Variofold 80 GV, set for two panels (16780): 1800 mm.
  • HAWA Variofold 80 GV, set for two panels and pivot panel (16781): 2700 mm.
  • HAWA Variofold 80 GV, set for four panels (16782): 3600 mm.
  • HAWA Variofold 80 GV, set for four panels and pivot panel (16783): 4500 mm.
  • HAWA Variofold 80 GV, set for six panels (16784): 5400 mm.
  • HAWA Variofold 80 GV, set for six panels and pivot panel (16785): 6300 mm.

Running track:

Aluminium, plain anodized, pre-drilled.

Bottom guide channel:

Aluminium, plain anodized, pre-drilled, 31 x 28 mm.

Locking:

Various accessories are available, consult manufacturer for details.

Accessories/ Other requirements:

Other accessories and spares are also available, consult manufacturer for details.

Similar products from Hawa Sliding Solutions AG