Hardware for simultaneously sliding up to four wood, metal or aluminium shutters weighing up to 60 kg.
Suitable for facades with a high proportion of glass, and areas where screening and shade form part of the facade design, such as:
Hardware for simultaneously sliding up to four wood, metal or aluminium shutters weighing up to 60 kg. Panel width: 550–1200 mm. Maximum height: 3200 mm. Suitable for shutter thickness of 28–40 mm.
Features and benefits:
Components:
Quantities vary depending on variant specified - consult manufacturer for details.
Applications:
Suitable for facades with a high proportion of glass, and areas where screening and shade form part of the facade design, such as:
Uniclass 2015 | |
CAWS | P21/10 Quantities and locations P21/350 Door track and running gear |
Product Reference | HAWA Frontslide 60 A Telescopic 2 (25120)Set for two sliding shutters. HAWA Frontslide 60 A Telescopic 3 (25121)Set for three sliding shutters HAWA Frontslide 60 A Telescopic 4 (25122)Set for four sliding shutters. |
Top track | 3500 mm6000 mmCut to sizeInsert requirements. |
Bottom guide channel | 6000 mmCut to sizeInsert requirements. |
Covering screen | - |
Type/ Material | Not requiredAluminium, plain anodizedAluminium, unanodized |
Length | Not required3500 mmPlain anodized only. 6000 mmCut to sizeInsert requirements. |
Accessories/ Other requirements | Not requiredAngled profile support, 6000 mmAvailable aluminium plain anodized or aluminium unanodized, insert requirements. Angled profile support, cut to sizeAvailable aluminium plain anodized or aluminium unanodized, insert requirements. Catch for sliding shutterStainless steel, with fixing screws. Cover fixingsRequired for attaching the covering screens. Connecting boltsFixing screws for securing top track to angled profile supportFloor guide unit, longFor use with bottom guide channel. Floor guide unit, shortFor use with bottom guide channel. Front cover platesFor wall fitting, for two sliding levels. Available aluminium plain anodized or aluminium unanodized, insert requirements. Parts for fitting top track coverScrew-on guide sliderSliding shutter lockAutomatically engages as the shutters close and can be released from the room interior side only using a pull-cord. Sliding shutter locking deviceDesigned to lock sliding shutters in any position on the track. Available 800 or 1200 mm, insert requirements. |
Standard product features | Configuration: Sliding, manual. |
Product Options | Top track/ bottom guide channel: Aluminium, plain anodized, predrilled. The top track can be installed either with or without covering screens. Accessories/ Other requirements: - Sliding shutter lock: This system prevents shutters from opening by themselves, even under the most adverse wind conditions. Other accessories and spares are also available, consult manufacturer for details. |