Hawa Centerfold 80 GV
Application

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.

Description

Centre-folding hardware for all-glass concertina walls without a bottom guide channel, for panel weights up to 80 kg. Panel width: 500–900 mm. Maximum panel height: 2600 mm. Suitable for door panel thickness of 10–12.7 mm.

Features and benefits:

  • Elegant design.
  • Left and right-handed configurations, as well as inwards or outwards-opening installations can all be achieved using the same components.
  • Smooth, quiet operation.
  • Minimal stacking space required.
  • Includes a secure locking mechanism.
  • Attached to every other panel is a folding/ pivot door catch with an integrated, individually adjustable retainer, to hold the centre fold wall flush when closed without operating a locking mechanism.
  • An access door equipped with our top pivot may also be added on the opposite side to the folding stack.
  • Compatible for use with sliding doors: Fully tempered monolithic glass (of 8, 10, 12 and 12.7 mm thickness) and fully tempered laminated glass, and fixed doors: Fully tempered monolithic glass (of 8, 12 and 12.7 mm thickness) and fully tempered laminated glass (of 10.8–13 mm thickness).
  • Has mid-point panel suspension, which means that the installation does not require a bottom guide channel up to six and a half panels.
  • All mechanisms, suspension devices, guides and locks are fully integrated into the aesthetically pleasing suspension and glass retainer profiles.
  • Vertical adjustment (±3 mm).

Components:

Quantities of each component will vary dependent on variant specified - consult manufacturer for details.

  • Four-wheeled trolley, M10, with plastic wheels.
  • Four-wheeled trolley, M10, with plastic wheels and spacer.
  • Top pivot bearing.
  • Vertically adjustable driver for pivot door.
  • End stop.
  • Folding/ pivot door catch, adjustable.
  • Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot (standard).
  • Vertical adjustment key SW 19.
  • Suspension assembly locking wrench SW 10/11.
  • Fork spanner SW 22/12, pivot door vertical adjustment.

Applications:

Suitable for residential and commercial settings, including:

  • Shopping centres.
  • Airports.
  • Hotels.
  • Restaurants.
  • Banks.

General information

Uniclass 2015

Pr_30_36_36_23 Door track and running gearPrimary

CAWS

P21/10 Quantities and locations

P21/350 Door track and running gear

Specification data - Door track and running gear

Product Reference

Hawa Centerfold 80 GV (16786)

Set for 1½ panels.

Hawa Centerfold 80 GV (16787)

Set for 1½ panel units with pivot panel.

Hawa Centerfold 80 GV (16788)

Set for 2½ panels.

Hawa Centerfold 80 GV (16789)

Set for 2½ panel units with pivot panel.

Hawa Centerfold 80 GV (16790)

Set for 3½ panels.

Hawa Centerfold 80 GV (16791)

Set for 3½ panel units with pivot panel.

Hawa Centerfold 80 GV (16792)

Set for 4½ panels.

Hawa Centerfold 80 GV (16793)

Set for 4½ panel units with pivot panel.

Hawa Centerfold 80 GV (16794)

Set for 5½ panels.

Hawa Centerfold 80 GV (16795)

Set for 5½ panel units with pivot panel.

Installation/ Design

As drawing

Insert requirements, various possibilities available. Consult manufacturer for details.

Running track

6000 mm

Cut to size

Insert requirements.

Bottom guide channel

6000 mm

Cut to size

Insert requirements.

Suspension/ Retainer profile

-

Type

Aluminium, plain anodized, brushed

Aluminium, plain anodized, brushed (straight)

Aluminium, un-anodized

Length

6500 mm

Cut to size

Insert requirements.

Hinges

Zinc alloy, dull chromium finish

Zinc alloy, dull chromium finish (straight)

Zinc alloy, raw finish

Locking

Hawa bar bolt lock with retention pin, 17 mm profile cylinder

On request. Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock with retention pin, 22 mm round cylinder

On request. Available with floor mounted sleeve or strike plate, insert requirements.

Hawa bar bolt lock, square/ hexagon socket 7/ 8 mm, complete with pivot

Standard. Available with floor mounted sleeve or strike plate, insert requirements.

Accessories/ Other requirements

Not required

Additional top lock

Brush seal for glass suspension and retainer profile

Cover cap

Available in dull chromium or raw finish. Insert requirement.

Drilling jig, for hinge retention bolts

Fork spanner to glass holder insert

Glass cutouts

Various configurations available, consult manufacturer's literature and insert requirements.

Guide with plastic slider, rattle proof, 14 mm, and suspension block

Installation tool for blocking keys

For 10–12.7 mm glass.

Long connecting rod

For door heights over 2500 mm.

Set of glass fixing parts

Short connecting rod

For door heights up to 2500 mm.

Surface treatment of suspension and glass retainer profiles

Thrust bearing

For fitting into bottom guide channel.

Thrust bearing sleeve

For pivot door.

Standard product features

Configuration:

Sliding/ stacking, centre folding.

Product Options

Product references:

Maximum widths:

  • Hawa Centerfold 80 GV, set for 1½ panels (16786): 1400 mm.
  • Hawa Centerfold 80 GV, Set for 1½ panel units with pivot panel (16787): 2300 mm.
  • Hawa Centerfold 80 GV, set for 2½ panels (16788): 2300 mm.
  • Hawa Centerfold 80 GV, set for 2½ panel units with pivot panel (16789): 3200 mm.
  • Hawa Centerfold 80 GV, set for 3½ panels (16790): 3200 mm.
  • Hawa Centerfold 80 GV, set for 3½ panel units with pivot panel (16791): 4100 mm.
  • Hawa Centerfold 80 GV, set for 4½ panels (16792): 4100 mm.
  • Hawa Centerfold 80 GV, set for 4½ panel units with pivot panel (16793): 5000 mm.
  • Hawa Centerfold 80 GV, set for 5½ panels (16794): 5000 mm.
  • Hawa Centerfold 80 GV, set for 5½ panel units with pivot panel (16795): 5900 mm.

Running track:

Aluminium, plain anodized, pre-drilled.

Bottom guide channel:

Aluminium, plain anodized, pre-drilled, 31 x 28 mm.

Locking:

Various accessories are available, consult manufacturer for details.

Accessories/ Other requirements:

Other accessories and spares are also available, consult manufacturer for details.

Similar products from Hawa Sliding Solutions AG