Square timber bollards.
Square bollards, available in a choice of Green Oak or pressure-treated Spruce/ Whitewood, in a planed finish.
The four-way weathered top and chamfered edges differentiate Garrick bollards from the Common range.
Available in plain form, with grooves and the option of reflective tape, and can be machined to accept steel rails or fitted with eyebolts for a chainlink connection.
Also available in Opepe hardwood as the Epping Timber Bollard (specified separately).
Material | Green Oak Pressure-treated Spruce/ Whitewood Softwood, available in square sections of 125 and 150 mm only. |
Uniclass 2015 | |
CAWS | Q50/190 Bollards Q50/30 Street furniture |
Product Reference | Garrick Timber Bollard |
Product code | - |
Prefix | GAGWith groove. GARWithout groove. |
Square section | 125 mm150 mm175 mm200 mm225 mm250 mm |
Overall height | 750 mm900 mm1200 mm1500 mm |
Material | Green OakPressure-treated Spruce/ WhitewoodSoftwood, available in square sections of 125 and 150 mm only. |
Holes for steel rail | - |
Size | 33 mm diameter42 mm diameter48 mm diameter |
Configuration | See 'Options' below and insert requirements. |
Accessories | NoneCHNSSteel spiked chain link, galvanized. CHNPSteel plain chain link, galvanized. EBABSteel M10 eye bolt, bright zinc plated. SLNKSteel split link, galvanized. TAPE CRed/ white chevron reflective tape. TAPE RRed reflective tape. TAPE WWhite reflective tape. TAPE YYellow reflective tape. |
Product Options | Product code: - Prefix: GAG: Bollards are available with a square cut groove, to allow for a reflective band if required. Material: Note that softwood type is variable due to fluctuating availability of raw materials. Consult manufacturer regarding current stock material. Holes for steel rails: Most bollards are available with pre-drilled holes to accept carbon steel rails. State size and number of holes required, height below top of bollard to the centre of the hole and whether the post is an end, intermediate, corner, three or four way junction, when specifying. |