Verified by manufacturer 6 months ago
600 x 450 mm slabs
BREEAM - Certification
Independent sustainability assessment
FOAMGLAS® Slab T3+ is a non-combustible and high-quality thermal insulation to be used throughout the entire internal and external building envelope.
Features & Benefits:
FOAMGLAS® insulation has a high compressive strength, capable to take high loads without deformation or deflection due to its rigid cell structure. FOAMGLAS® passes EN 826 Annex A that defines the uniform load bearing capabilities of insulations which do not compress before the load capability is recorded.
FOAMGLAS® is dimensionally stable, neither shrinks nor swells and does not slump over time. It has a low co-efficient of expansion within the same range to steel, wood and concrete.
Lenght : 600
To be removed
H30/120 Fibre cement
H30/10 Fibre cement
P10/185 Soffit insulation
K10/30 Metal stud
J31/26 Thermal insulation
J41/26 Thermal insulation
J42/27 Thermal insulation
K10/41 Wall lining system (metal furrings)
K10/35 Wall lining system (metal framing)
J31/335 Warm deck roof insulation
J31/337 Cellular glass insulation
J41/430 Warm deck roof insulation
J42/430 Warm deck roof insulation
K10/125 Metal stud partition system
K10/155 Wall lining system (metal studs)
K10/165 Wall lining system (metal framing)
To BS EN 13167.
Reaction to fire
Non-Combustible Euroclass A1 To EN 13501-1.
Third-party product certification
Environmental Product Declaration (ISO 14025 and EN 15804): EPD-PCE-20150042-IBA1-DE.
Thermal conductivity (maximum)
λD ≤0.036 W/m·K.
Compressive strength (minimum)
≥500 kPa to EN 826 annexe A.
Water vapour resistance
μ = ∞.
Contains Red List materials
Country of material origin
Country of product manufacture
Production waste is reused as raw material in the factory or as filling material
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.
TG1 Technical Guide
PDS_FOAMGLAS® Slab T3+
TDS_1.2.1_Wall Below Ground - FOAMGLAS Insulation to Concrete Wall
TDS_2.1.4_Facade - FOAMGLAS Insulation with Fixings for Cement Board Panels Cladding
TDS_2.2.1_Facade - FOAMGLAS Insulation with Render Mechanically Fastened
TDS_2.2.7_Facade - FOAMGLAS Insulation with Fixing for Metal Panels Cladding
TDS_3.1.2_Floor Internal - Concrete with FOAMGLAS Insulation with Isocrete Screed on Top(Cold Adhesive)
TDS_3.1.14_Floor Internal - Concrete slab with FOAMGLAS Insulation for Raised Access Floors (Cold Adhesive)
TDS_3.2.7_Wall Internal - FOAMGLAS Insulation with Plasterboard Mechanically Fastened
TDS_3.2.9_Wall Internal - FOAMGLAS Insulation with Suspended Plasterboard Finish
TDS_3.3.5_Soffit - FOAMGLAS Insulation with Plasterboard or Panels mounted on Timber or Metal Frame
TDS_3.3.6_Soffit - FOAMGLAS Insulation with Plasterboard or Panels mounted on Suspended Ceiling
TDS_4.1.1_Roof - Concrete Deck - FOAMGLAS Insulation (Hot Applied) with Membranes (Flat or Tapered)
TDS_4.3.1_Roof - Roof - Concrete Deck - FOAMGLAS Insulation (Hot Applied) with Paving Slabs on Gravel or Supports (Flat or Tapered)
TDS_1.2.3_Wall Below Ground - FOAMGLAS Insulation to Waterproofing Membrane on a Concrete Wall
FOAMGLAS Board T3+ - Cellular Glass Insulation
FOAMGLAS® Board F - Cellular Glass Insulation
FOAMGLAS® ANGLE FILLET - Cellular Glass Insulation
FOAMGLAS® Board S3 - Cellular Glass Insulation
FOAMGLAS® Board T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T3+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED F - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED S3 - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED T3+ - Cellular Glass Insulation