Verified by manufacturer 1 month ago
BREEAM - Certification
Independent sustainability assessment
FOAMGLAS® Slab S3 is a non-combustible and high-quality thermal insulation to be used internally or externally when high compressive strength is required.
Features & Benefits:
FOAMGLAS® insulation has a high compressive strength, capable to take high loads without deformation or deflection due to its rigid cell structure. FOAMGLAS® passes EN 826 Annex A that defines the uniform load bearing capabilities of insulations which do not compress before the load capability is recorded.
FOAMGLAS® is dimensionally stable, neither shrinks nor swells and does not slump over time. It has a low co-efficient of expansion within the same range to steel, wood and concrete.
Q37/130 Extensive green roof
Q37/120 Simple intensive green roof
Q37/110 Intensive green roof
E20/200 Proprietary underslab insulation
E20/30 Underslab insulation
F30/10 Full fill cavity insulation
K10/30 Metal stud
J31/26 Thermal insulation
J41/26 Thermal insulation
J42/27 Thermal insulation
K10/35 Wall lining system (metal framing)
K10/50 Suspended ceiling system on metal framing
F30/150 Full fill cavity insulation
J31/337 Cellular glass insulation
J41/430 Warm deck roof insulation
J42/430 Warm deck roof insulation
K10/125 Metal stud partition system
K10/155 Wall lining system (metal studs)
K10/220 Proprietary suspended ceiling system
K10/165 Wall lining system (metal framing)
To BS EN 13167.
Reaction to fire
Non-Combustible Euroclass A1 To EN 13501-1.
Material complying with Euroclass A1, non-combustible, no toxic fumes (EN 13501-1).
Third party product certification
Environmental Product Declaration (ISO 14025 and EN 15804): EPD-PCE-20150042-IBA1-DE. BRE Green Guide Rating: A. Certificate Natureplus.
Thermal conductivity (maximum)
λD ≤ 0.045 W/mK.
Compressive strength (minimum)
≥ 900 kPa to EN 826 annexe A.
130 kg/m³ (to EN 1602, ± 10%).
Water vapour resistance
μ = ∞.
≥28 dB at 100 mm thickness.
Contains Red List materials
Country of material origin
Country of product manufacture
Production waste is reused as raw material in the factory or as filling material.
60% minimum recycled glass insulation board.
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.
TG1 Technical Guide
PDS_FOAMGLAS® Slab S3
TDS_1.1.3_Below Ground - FOAMGLAS Insulation Beneath Structural Slab (Load Bearing)
TDS_1.2.1_Wall Below Ground - FOAMGLAS Insulation to Concrete Wall
TDS_3.1.2_Floor Internal - Concrete with FOAMGLAS Insulation with Isocrete Screed on Top(Cold Adhesive)
TDS_3.1.14_Floor Internal - Concrete slab with FOAMGLAS Insulation for Raised Access Floors (Cold Adhesive)
TDS_4.3.1_Roof - Roof - Concrete Deck - FOAMGLAS Insulation (Hot Applied) with Paving Slabs on Gravel or Supports (Flat or Tapered)
TDS_1.2.3_Wall Below Ground - FOAMGLAS Insulation to Waterproofing Membrane on a Concrete Wall
FOAMGLAS Board T3+ - Cellular Glass Insulation
FOAMGLAS® Board F - Cellular Glass Insulation
FOAMGLAS® ANGLE FILLET - Cellular Glass Insulation
FOAMGLAS® Board S3 - Cellular Glass Insulation
FOAMGLAS® Board T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T3+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED F - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED S3 - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED T3+ - Cellular Glass Insulation