Verified by manufacturer 2 months ago
BBA Agrément Certificate
Independent sustainability assessment
BREEAM - Certification
FOAMGLAS® PERINSUL HL is a very high density thermal insulation used to eliminate thermal bridging at structural junctions.
A very high density thermal insulation used to eliminate thermal bridging at structural junctions.
Features and benefits:
FOAMGLAS® insulation has a high compressive strength, capable to take high loads without deformation or deflection due to its rigid cell structure. FOAMGLAS® passes EN 826 Annex A that defines the uniform load bearing capabilities of insulations which do not compress before the load capability is recorded.
FOAMGLAS® is dimensionally stable, neither shrinks nor swells and does not slump over time. It has a low co-efficient of expansion within the same range to steel, wood and concrete.
Black core with black / green liner
PE/Glass Fleece Composite Liner (top and bottom)
F10/39 Thin joint autoclaved aerated concrete (AAC) common blockwork
F10/37 Autoclaved aerated concrete (AAC) common blockwork
F10/36 Concrete common blockwork
F10/34 Thin joint clay common blockwork
F10/33 Clay common brickwork
F10/25 Manufactured stone blockwork
F10/20 Manufactured stone blockwork
F10/18 Concrete facing blockwork
F10/10 Reclaimed brick facing brickwork
F10/5 Facing brickwork
F10/215 Concrete facing brickwork
F10/230 Reclaimed brick facing brickwork
F10/255 Concrete facing blockwork
F10/110 Clay facing brickwork
F10/360 Autoclaved aerated concrete (AAC) common blockwork
F10/345 Concrete common brickwork
F10/290 Manufactured stone blockwork
F10/315 Clay common brickwork
F10/355 Concrete common blockwork
F10/295 Manufactured stone blockwork
F10/370 Thin-joint autoclaved aerated concrete (AAC) common blockwork
To BS EN 13167.
Work sizes (length x width x height)
450 x 100 x 65 mm.
450 x 140 x 65 mm.
450 x 215 x 65 mm.
450 x 100 x 100 mm.
450 x 140 x 100 mm.
450 x 215 x 100 mm.
450 x 140 x 140 mm.
450 x 140 x 215 mm.
Compressive strength (minimum)
≥2.75 MPa to EN 826 annexe A.
Thermal conductivity (maximum)
λD ≤0.058 W/m·K.
Water vapour resistance
μ = ∞.
≥28 dB at 100 mm thickness.
Third party product certification
British Board of Agrement (BBA Perinsul 14/5111).
Reaction to fire
Euroclass E (Core material Euroclass A1).
Its use is not subject to any restriction on building height or proximity to boundaries. Refer to BBA Certificate Section 8 (page 06).
Bitumen coated and laminated with a PE/ glass fleece composite top and bottom (black and green).
Contains Red List materials
Country of material origin
Country of product manufacture
Production waste is reused as raw material in the factory or as filling material.
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.