Verified by manufacturer 2 months ago
BBA Agrément Certificate
Certificate type
Independent sustainability assessment
Certificate type
BREEAM - Certification
Certificate type
FOAMGLAS® PERINSUL HL is a very high density thermal insulation used to eliminate thermal bridging at structural junctions.
A very high density thermal insulation used to eliminate thermal bridging at structural junctions.
Features and benefits:
Compressive Strength:
FOAMGLAS® insulation has a high compressive strength, capable to take high loads without deformation or deflection due to its rigid cell structure. FOAMGLAS® passes EN 826 Annex A that defines the uniform load bearing capabilities of insulations which do not compress before the load capability is recorded.
FOAMGLAS® is dimensionally stable, neither shrinks nor swells and does not slump over time. It has a low co-efficient of expansion within the same range to steel, wood and concrete.
ColorBlack core with black / green liner | Black Green White |
Finish | Other PE/Glass Fleece Composite Liner (top and bottom)
|
Material | Cellular glass |
Shape | Rectangle |
Length | 450 mm |
Width | 100 mm 140 mm 215 mm |
Height | 65 mm 100 mm 140 mm |
Uniclass | |
CAWS | F30/155 Partial fill cavity insulation J21/427 Cellular glass insulation J31/337 Cellular glass insulation K10/125 Metal stud partition system F30/12 Partial fill cavity insulation K10/30 Metal stud P10/190 Insulation fitted between studs J31/26 Thermal insulation J41/26 Thermal insulation J42/27 Thermal insulation |
Standard | To BS EN 13167. |
Reaction to fire | Euroclass E (Core material Euroclass A1).Its use is not subject to any restriction on building height or proximity to boundaries. Refer to BBA Certificate Section 8 (page 06). |
Third-party product certification | British Board of Agrement (BBA Perinsul 14/5111). |
Thermal conductivity (maximum) | λD ≤0.058 W/mK. |
Thickness | 65 mm.100 mm.140 mm. |
Compressive strength (minimum) | ≥2.75 Mpa to EN 826 annexe A. |
Density | 200 kg/m³. |
Recycled content | ≥60%. |
Facing | Bitumen coated and laminated with a PE/Glass fleece composite top and bottom (black and green). |
Edges | 90 Degrees. |
Water vapour resistance | μ = ∞. |
Sound reduction | ≥28 dB at 100 mm thickness. |
Width | 100 mm. 140 mm. 215 mm. |
Contains Red List materials | No |
Country of material origin | Belgium |
Country of product manufacture | Belgium |
Recyclability | Production waste is reused as raw material in the factory or as filling material. |
Recycled content | 60 % |
FOAMGLAS Board T3+ - Cellular Glass Insulation
FOAMGLAS® Board F - Cellular Glass Insulation
FOAMGLAS® ANGLE FILLET - Cellular Glass Insulation
FOAMGLAS® Board S3 - Cellular Glass Insulation
FOAMGLAS® Board T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T3+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) T4+ - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED F - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED S3 - Cellular Glass Insulation
FOAMGLAS® READY (Block) TAPERED T3+ - Cellular Glass Insulation