NBS Source
I'm a manufacturer

Flame-Free Reinforced Bituminous Membrane (Felt) Flat Roofing System - IKO ULTRA Life 30 - Built-up Flat Roof System

Verified by manufacturer 2 months ago

IKO UK Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • ISO 45001 Health and Safety Management

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

Premium flame-free flat roof waterproofing system.

Jump to:
+44 (0)1257 255 771 Website

Application

Flat roofing applications.

Description

At the heart of each IKO ULTRA Life 30 system is an extremely robust waterproofing membrane. These membranes have been engineered to incorporate thicker coatings with enhanced polymer content. They are backed up by high-strength reinforcements for outstanding durability, high flexibility, and unrivalled workability. IKO ULTRA Life 30 systems have been tested under ENV1187 and have been classified as BROOF(t4) in accordance with BS EN 13501-5: 2005.


Key benefits to your project

  • Only installed by an IKO approved contractor.
  • BBA Certification (15/5238) – durability with a service life of more than 35 years.
  • Classified BROOF (t4) in accordance with BS EN 13501-5: 2005 fire classification. Enables unrestricted use within Part B4 of the Approved Documents of the Building Regulations (tested under ENV1187).
  • Exceptional mechanical strength and dimensional stability.
  • Optimum SBS polymer content for unrivalled flexibility and workability.
  • Choice of installation methods, including a completely flame-free adhered installation option.
  • Backed with a 30 year guarantee.

General information

Color

Black

Red

Finish

Mineral

Material

Bitumen

Polyester

Shape

Other

Guidance for specification option:

Roll

Length

Bespoke

Width

Bespoke

Warranty description

30 year

Uniclass

Ss_30_40_30_72 Reinforced bitumen membrane warm roof covering systemsPrimary

CAWS

J41/115 Single-layer reinforced bitumen membrane warm deck roof covering

J41/10 Reinforced bitumen membrane warm deck roof covering

Product range

Reinforced Bituminous Membrane Systems

Specification data - Reinforced bitumen membrane warm roof covering systems

Preparation

-

Horizontal work

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.


S-A membranes only.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

Skirtings and vertical work

IKOpro Bonding Agent.

Guidance for specification option:

IKOpro Systems Bonding Agent (black) is a specially formulated primer. Enhancing the properties of self- adhesive bitumen roofing membranes, it promotes strong bonds even at temperatures as low as 5°C.


S-A membranes only.

IKOpro Sprayfast MPP.

Guidance for specification option:

KOpro Sprayfast MPP (Black, Multipurpose Primer) is a

specially formulated high performance bonding primer.

It allows the speed of application of the bonding primer

to be five times faster than conventional bitumen primers,

promoting strong bonds at temperatures as low as

5°C. For self adhesive and torch applied bitumen membranes.

IKOpro Quick Dry Bitumen Primer.

Guidance for specification option:

IKOpro Quick Dry Bitumen Primer (black) is a fast-drying bitumen priming solution for torch applied bitumen membranes.


T-O membranes only.

Air and vapour control layer

-

Type

IKO Ultra S-A Air and Vapour Control Layer.

Guidance for specification option:

Self adhesive for combustible substrates


S-A VCL (Self-Adhesive) is a high performance vapour barrier for use in adhered IKO Polymeric systems. It is composed of a polyester reinforced aluminium core, coated with a rubber modified, self-adhesive bitumen coating. The membrane is protected on the underside with a release film backing and coated on the top surface with a fine mineral finish. A selvedge of 75mm width, protected with release film, provides a quick means of completing side laps.

Attachment

Fully bonded.

Insulation

-

Type

IKO enertherm Gold Insulation, 2400 x 1200 mm.

Guidance for specification option:

Thickness: 30, 50, 60, 80, 100, 120, 140, 150 mm. Consult literature and insert requirements.

IKO enertherm Gold Insulation, 1200 x 1200 mm.

Guidance for specification option:

Thickness: 30, 40, 50, 70, 80, 100, 120,140 mm. Consult literature and insert requirements.

IKO enertherm MW, 60 mm thickness.

Guidance for specification option:

A dual-density stone wool insulation board. It is used for the thermal insulation in a variety of warm flat roofing system applications where a non-combustible and/ or acoustic insulation solution is required. Width: 1200 mm.

IKO enertherm MW, 120 mm thickness.

Manufacturer guidance

IKO enertherm GOLD is a 100 % CFC, HCFC or HFC-free insulation board with a rigid polyisocyanurate foam core, clad on both sides with a multi-layer gastight aluminium complex. This high-quality rooftop insulation consists of no fewer than seven layers, combined into a single complex. It is tested under extreme conditions in respect of water absorption, mechanical properties, corrosion resistance and emissivity. 

Fixing

IKOpro PU bonding adhesive.

IKOpro Sprayfast IBA.

Waterproof covering

-

First layer

-

Type

IKO Ultra H-A Underlay.

Guidance for specification option:

IKO Systems H-A underlays are polyester reinforced bitumen membranes used as underlays within a built up roofing system, The membranes are coated on both sides with self-adhesive bitumen SBS elastomeric coating. They have a fine mineral upper surface with a 75 mm release film selvedge to facilitate rapid installation of lap joints. Size: 1 x 16 m.

IKO Ultra H-A DETAILING Underlay.

Guidance for specification option:

The underside has a self-adhesive bitumen coating for fully bonded and all waterproofing detailing applications. The self-adhesive coating is protected by a release film. 


Flame-free application. Surface protection from the fine granule finish. Grey in colour. Size: 16 x 1 m

Attachment

Bonded by heat activation to primed insulation board (laps heat welded).

Top layer

-

Type

IKO Ultra Life30 Cap Sheet, Black.

IKO Ultra Life30 Cap Sheet, Red.

Manufacturer guidance

IKO ULTRA LIFE 30 Torch-On Detailing Cap Sheet is a complementary, high performance membrane that is ideal for forming typical details on IKO ULTRA LIFE 30 Flame-Free and Hybrid Systems, with a granular finish on the top surface and finished on the reverse side with a thermofusible film. The base fabric is a polyester/ glass fibre laminate, providing excellent strength, flexibility and dimensional stability.

Attachment

Fully bonded by touching.

Detail work

-

Flashings

IKOflash lead-free flashing.

Skirtings and upstands

IKO Ultra T-F DETAILING Underlay.

Guidance for specification option:

IKO Systems Torch-Free (T-F) Detailing Underlay is a black polyester reinforced bitumen membrane, used as an underlay within a built up roofing system; the membrane is coated on both sides with a self-adhesive bitumen SBS elastomeric coating. The upper surface is protected with a protective film that facilitates rapid bonding of the waterproofing layers. The self-adhesive coating underside is protected by a release film. Size: 16 x 1 m.

IKO Ultra Life30 S-A DETAILING Cap sheet, Black.

Guidance for specification option:

A complementary, high performance membrane that are ideal for forming typical details on IKO UPXL Flame-Free and Hybrid Systems, with a granular finish on the top surface and a removable release film on the underside. The base fabric is a graphite-treated, polyester/glass fibre laminate and this is coated with SBS self-adhesive modified bitumen, providing excellent strength, flexibility and dimensional stability. Size: 8 x 1 m.

IKO Ultra Life30 S-A DETAILING Cap sheet, Red.

Weight

5.4 kg/m².

Guidance for specification option:

This refers to the IKO Ultra Life 30.

Roll weight

43.2 kg.

Guidance for specification option:

This refers to the IKO Ultra Life 30.

Sustainability data

Country of product manufacture

United Kingdom

Material

Bitumen

Polyester

Manufacturing plant location

Third party certifications

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate - IKO ULTRA Life 30 Hybrid System

BBA Agrément Certificate

BBA Agrément Certificate

BBA Certificate - IKO ULTRA Life 30 Torch Free System

ISO 45001 Health and Safety Management

ISO 45001 Health and Safety Management

IKO PLC ISO 45001 OHS Certificate

ISO 9001 Quality Management

ISO 9001 Quality Management

IKO PLC ISO 9001 Certificate

Literature

Technical Data Sheet (TDS) - IKO ULTRA Life 30 Capsheet

Technical Data Sheet (TDS) - IKO ULTRA Life 30 Capsheet

Technical Data Sheet (TDS) - IKO ULTRA Life 30 Self-Adhesive Detailing Capsheet

Technical Data Sheet (TDS) - IKO ULTRA Life 30 Self-Adhesive Detailing Capsheet

Brochure - IKO PLC (UK) ESG Report

Brochure - IKO PLC (UK) ESG Report

Technical Data Sheet (TDS) - IKO ULTRA Torch-Free Underlays

Technical Data Sheet (TDS) - IKO ULTRA Torch-Free Underlays

Technical Data Sheet (TDS) - IKO ULTRA Heat-Activated Underlays

Technical Data Sheet (TDS) - IKO ULTRA Heat-Activated Underlays

Technical Data Sheet (TDS) - IKO enertherm GOLD

Technical Data Sheet (TDS) - IKO enertherm GOLD

Technical Data Sheet (TDS) - IKO enertherm MW

Technical Data Sheet (TDS) - IKO enertherm MW

Technical Data Sheet (TDS) - IKO PUMA Zero Adhesive

Technical Data Sheet (TDS) - IKO PUMA Zero Adhesive

Technical Data Sheet (TDS) - IKO ULTRA Self-Adhesive Vapour Control Layer (VCL)

Technical Data Sheet (TDS) - IKO ULTRA Self-Adhesive Vapour Control Layer (VCL)

Technical Data Sheet (TDS) - IKOpro Sprayfast MPP

Technical Data Sheet (TDS) - IKOpro Sprayfast MPP

Technical Data Sheet (TDS) - IKOpro Bonding Agent

Technical Data Sheet (TDS) - IKOpro Bonding Agent

Technical Data Sheet (TDS) - IKOpro Quick Dry Bitumen Primer

Technical Data Sheet (TDS) - IKOpro Quick Dry Bitumen Primer

Technical Data Sheet (TDS) - IKOpro PU Membrane Adhesive

Technical Data Sheet (TDS) - IKOpro PU Membrane Adhesive

Technical Data Sheet (TDS) - IKOpro Sprayfast BMA

Technical Data Sheet (TDS) - IKOpro Sprayfast BMA

Case studies

Hatton Hall, Wellingborough

Hatton Hall, Wellingborough