Fireroll E30 Fire Resisting Roller Shutters

Fire-resisting roller shutters, which have been tested to EN 1634-1 for fire resistance and are rated E30-C2 in accordance with EN 13501-2 and EN 14600. The shutter is electrically operated as standard with controlled descent gravity failsafe closure, thus avoiding any potential health and safety risks associated with manual shutters, the closing mechanisms of which incorporate a drop-bar system.

Features and benefits:

• Construction: the shutter curtains are constructed from continuously interlocking 51 mm flat-faced laths, held securely in place by end locks. The bottom rail is also formed from a reinforced lath to give uniformity of appearance.

• Guides: vertical guides are fabricated from 50 x 25 mm cold-rolled galvanized steel channels which are attached to the supporting structure.

• Roller: the roller is made from seamless steel tube of adequate diameter to avoid deflection and is supported on steel endplates on bearings.

• Casings: coil and motor casings are constructed from galvanized steel and cover all moving parts at high level.

• Operation: the Speedsafe drive unit has a 240 V, single phase geared induction motor with an electromagnetic brake, limit switches, release unit, a built-in starter panel and low-level key switch with an emergency stop button. The design provides a fail-safe system which will close the shutter automatically in the event of a fire situation.

• Activation is via a signal from the fire alarm system to an auto-reset solenoid which when activated releases the motor brake allowing the shutter to close by gravity with a controlled descent. A safety brake is supplied to comply with the safeguarding requirements of EN 12604.

• The product is CE marked accordingly.

Applications:

Designed to provide compartmentation for smaller openings, where its aesthetic close-fitting lath curtain makes it eminently suitable for all applications – but particularly servery-type openings, or where aesthetic appearance is paramount.