Verified by manufacturer over a year ago
Fire protection for ventilation, smoke extract and kitchen extract ducts.
Designed to provide up to two hours’ fire protection to ductwork in addition to fire resistance where they pass through fire rated walls and floors.
FIREPRO® DuctRock® Slab is composed of high density, non-combustible stone wool insulation, finished with a high-emissivity black foil facing. FIREPRO® Glue and high performance Black Aluminium Foil Tape are available for sealing all board joints.
The ROCKWOOL DuctRock® slabs are readily available in three thicknesses, are easy to handle and simple to install. The slabs can be installed using stud welded pins, steel washers and FIREPRO® Glue, and are easy to cut with a hand saw or circular/table saw.
DuctRock® Slab has been tested to the latest harmonized European standard and is capable of achieving a fire resistance up to EI 120, up to two hours’ fire protection for rectangular ventilation and smoke extract ducts and up to one hour fire protection to ducts with a combustible lining (kitchen extract) ducting.
The solution is typically used in commercial and industrial settings where they travel throughout the building passing through fire rated walls and floors.
Insulating ductwork can be beneficial for reducing thermal transmission as well as protecting the structure in the event of a fire which can amount to costly damages. All joints are to be filled with FIREPRO® Glue (see separate product) and held tightly closed.
Features and benefits:
Black foil facing.
High density, non-combustible mineral wool insulation, finished with a high emissivity black foil facing.
U90/490 Site-applied insulation to ductwork
Aluminium foil faced.
Reaction to fire classification
To EN 13501-4 and BS EN 1366, up to EI 120.
Insulation thickness (minimum)
Installing foil faced mineral wool insulation on ductwork.
1000 x 1200 mm.
Width x length.