Fire Shutter - Fireroll VR60
Application

The product can be utilized in any application where fire compartmentation is required, and is suited to applications where radiated heat is considered an issue.

Description

Due to its design, the Fireroll VR60 insulated rolling fire shutter provides 60/ 60 minutes fire protection between individual compartments. 


The door has been successfully tested to EN 16341 and classified as EI60, in accordance with EN 13501-2. 


The product has all the advantages of a rolling fire product which can be stored above the false ceiling, whilst meeting the requirements of both integrity and insulation in line with the latest Building Regulations.


CE Marked accordingly.


Features and benefits:

  • Operation: Electrical operation is by means of a 400 V nominal direct drive three-phase motor mounted on one end plate. In the event of a fire and/ or mains failure, a 24 V DC auxiliary drive unit closes the door.
  •  Controls: A control panel is supplied for mounting at a high level, which incorporates batteries and a facility for an incoming fire signal. Cables between the panel and motor are to be flameproof. Low level control is by means of open, close, stop push button on the face of the control panel.
  • Curtain: Constructed from 63 x 36 mm synthetic material laths infilled with high-performance insulation. Stainless steel cables connect the laths together and are fastened to the barrel at the head.
  • Bottom rail: Comprises a standard lath fitted with an extruded polyvinyl chloride (PVC) bottom seal.
  • Guides: Side guides are formed from galvanized steel channels with a black intumescent insert and prepared for fixing to the opening structure.
  • Roller: The roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection and is mounted on bearings on each endplate.
  • Endplates: Fabricated from galvanized steel of adequate thickness relative to door size and supplied with steel plates for fixing to the structure.
  •  Head Seal: An arrangement comprising galvanized steel 'U' profile and MDF board with fire cover are fixed to the lintel at the point where the top of the door engages providing a seal against the passage of flames and hot gases. 

General information

Size

Color

Grey

The curtain is self-finished grey with the perimeter intumescent seal in black.

Finish

Self-finished

Material

Synthetic

Polyvinyl chloride

Steel

Polymer

Shape

Rectangular

Square

WarrantyDescription

12 months

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary
Pr_30_59_84_30 Fire-resisting roller shutters

CAWS

L20/610 Roller shutters/ curtains

L20/530 Sliding folding external doors

L20/60 Doors

Specification data - Roller shutters Enhanced data

Standard

EN 16341 and EN 13501-2.

Opening sizes

Insert requirement, available up to 6 x 5 m (clear width x clear height), subject to a maximum of 22 m².

-

Format

Internal.

External.

Arrangement

Vertical, fitted into reveal.

Shutter curtain.

-

Lath material

Synthetic.

Profile

Insulated.

Finish and colour

Grey.

Frame and guides

-

Material

Steel.

Finish

Galvanized.

Colour

Black.

Operation

-

Mode

Automatic.

Electrical via a 400 V, direct drive three-phase motor mounted on one end plate

Control

Control panel incorporating open/ close/ stop push buttons

-

Accessories

None.

Polyester powder-coated finish to side guides.

Insert requirement.

Product Reference

Fireroll VR60 Insulated Fire Shutters

Size

Weight

50 kg/m².

Approximately.

Literature
Similar products from Bolton Gate Company