BBA Agrément Certificate
Certificate type
QA Certificate
Certificate type
Insulated partition system with 60 minutes fire resistance.
Insulated metal stud partition system with double layer of Fermacell Gypsum-Fibreboard to one side, single layer to the opposite side.
Uniclass | |
CAWS | K10/125 Metal stud partition system K10/30 Metal stud |
Product Reference | Fermacell 1S29 Insulated Partition |
Metal studs | 50 mm75 mm100 mm |
Insulation | 40 mm60 mm70 mm |
Finishing | - |
Type | Fermacell Fine Surface Treatment (FST) |
Joint treatment | Fermacell Jointstik 1 mm glued jointSquare edged boards. Fermacell Joint Filler 5–7 mm filled jointFor site cut boards. Fermacell Joint Reinforcement Tape and Fermacell Joint FillerTaper edge boards. |
Standard product features | Fire resistance: 60 minutes. Linings: One layer of 12.5 mm Fermacell to one side; one layer of 12.5 mm Fermacell and one layer of 10 mm Fermacell to the other side. N.B When using Tapered Edge Boards, first layer must be a Square Edge Board, for double layer systems. - Fixings: 30 mm Fermacell screws at 250 mm centres on single boarded side; 30 mm Fermacell screws at 400 mm centres and 40 mm Fermacell screws at 250 mm centres on double boarded side. Recycled content: Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable. Other requirements: Fire stopping around service penetrations. Frame out openings with the same number of layers of board as per above specification. Sockets backed using baffle boxes, intumescent putty pads or suitable rock mineral wool, sufficient to maintain the fire/acoustic performance. Movement joints are required at maximum 8 linear metre intervals. Refer to manufacturer's literature. Vapour barrier as required for high humidity areas. For tiled areas reduce studs to 400 mm centres as required. Tile adhesive to be suitable for gypsum based substrate. Provide door reinforcement as required to suit door weights and opening size. Ensure no vertical joints at door jambs. Offset all board joints by minimum 200 mm. |
Product Options | Metal studs:
Insulation (minimum density):
Partition performance (based on stud type and insulation density/ thickness): - 50 mm stud, 40 mm mineral wool (45 kg/m³):
- 75 mm stud, 60 mm mineral wool (30 kg/m³):
- 100 mm stud, 70 mm mineral wool (30 kg/m³):
|
Recycled content | Best Fermacell gypsum fibreboard contains 100% recycled content. All by-products recyclable % |
Fermacell 1H11 Timber Stud Partition
Fermacell 1H13 Timber Stud Partition
Fermacell 1H21 H20 Timber Stud Partition
Fermacell 1H21 Timber Stud Partition
Fermacell 1H22 Timber Stud Partition
Fermacell 1H29 Timber Stud Partition
Fermacell 1S15 Partition
Fermacell 1S21 Insulated Partition
Fermacell 1S22 Partition
Fermacell 1S31 Insulated Partition