This site uses cookies to store information on your computer. Learn more about these cookies, and how to opt out of them. Find out more

NBS Source

Fast Curing Cold Applied Liquid System for Inverted Roofs - IKO Polimar FCS

Verified by manufacturer 2 months ago

IKO PLC

Two-component polymethyl methacrylate (PMMA)-based waterproofing resin system.

Jump to:
+44 (0)1257 255 771 www.ikogroup.co.uk

Application

Inverted flat roof constructions.

Description

Two-component polymethyl methacrylate (PMMA)-based waterproofing resin. Requires mixing with IKO Polimar FCS (Fast Curing System) Catalyst before use - consult manufacturer for details.


Features and benefits:

  • Each layer will cure in approximately 20 minutes for an easy, quick application.
  • Provides seamless waterproofing of all areas, including complex upstands.
  • Highly flexible and crack-bridging, even in extreme cold temperatures.
  • Permanently weather-resistant (high and low temperatures, UV rays, hydrolysis).
  • No back falls.
  • Rot and root resistant (FLL tested and approved).
  • Up to 20-year guarantee.
  • BBA Agrément Certificate 14/5178.
  • NHBC Accepted.

General information

Color

Grey

Material

Polymethyl methacrylate (PMMA)

Length

Bespoke

Width

Bespoke

WarrantyDescription

20 year

Uniclass

Ss_30_40_30_42 Liquid-applied inverted roof covering systemsPrimary

CAWS

J31/12 Inverted roof coating

J31/130 Inverted roof coating

J31/353 Waterproof coating

Specification data - Liquid-applied inverted roof covering systems

Preparation

-

Horizontal work

IKO Polimar FCS Primer.

IKO Polimar FCS (Fast Curing System) Primer is a two-component, fast-reactive combination primer for interface details and upstands with changing substrate materials. Must be mixed with IKO Polimar FCS (Fast Curing System) Catalyst prior to installation.


IKO Polimar FCS Concrete primer.

IKO Polimar FCS (Fast Curing System) Concrete Primer is a non-pigmented yellow primer based on a two-component fast-reactive and fast-curing polymethyl methacrylate resin, for the preparation of absorbent substrates such as concrete and screeds.

IKO Polimar FCS Low viscosity primer.

IKO Polimar FCS (Fast Curing System) Low Viscosity Primer is a two-component, fast-curing, low-viscosity primer with good penetration properties on porous substrates.

IKO Polimar FCS Bitumen primer.

IKO Polimar FCS (Fast Curing System) Bitumen Primer is a non-pigmented primer based on a two-component fast-reactive polymethyl methacrylate resin, for the preparation of asphaltic and bituminous substrates.

IKO Polimar FCS Asphalt & Bitumen Primer.

A 2-component, fast curing PMMA-based resin primer for use on bitumen and asphalt substrates in preparation for the application of IKO Polimar FCS system.

Skirtings and vertical work

IKO Polimar FCS Primer.

IKO Polimar FCS Concrete primer.

IKO Polimar FCS Low viscosity primer.

IKO Polimar FCS Bitumen primer.

IKO Polimar FCS Asphalt & Bitumen Primer.

Liquid-applied waterproofing

-

Type

IKO Polimar FCS Waterproofing reinforced with IKO 110 sgm Polyester Fleece.

Polyester fleece: White, 1.05 x 50 m.

Reinforcement

IKO Protection Fleece.

Surface treatment

50 mm minimum Paving slabs, 80Kg/m² 20 mm -40mm Ballast and/or Green roof finishes are available, consult manufacturer and insert requirements.

-

Insulation

-

Type

IKO enertherm XPS insulation, 600 x 1250 mm.

IKO enertherm XPS is a light orange rigid extruded polystyrene (XPS) board with a Global Warming Potential (GWP) of less than five. A lightweight, lap jointed board with high compressive strength and performance. Thermal performance of an inverted roof is improved when used in conjunction with IKO enertherm WCL. Used for the thermal insulation of a wide variety of flat roofs including an inverted roof below ballast or paving slabs or a green/garden roof. BBA certified 17/5467. Thickness: 50, 70, 100, 130, 160, 180, 200, 220 mm available, consult literature and insert requirements.

Water control layer

IKO enertherm WCL (Water control layer).

Colour

Dark grey, RAL 7043.

Bespoke.

Insert requirements.

Storage

Store products sealed in their original airtight container and in a cool, dry and frost-free place.

The unopened product has a shelf life of at least 6 months after

delivery. Direct sunlight on the containers should be avoided, including on site.

Application temperature

Application can proceed when the air temperature is between +3°C and +35°C.

Similar products from IKO PLC

Cold Applied Liquid for Roofs, Balconies & Terraces - IKO Metatech

Cold Applied Liquid for Roofs, Balconies & Terraces - IKO Metatech

Single-Component Cold Applied Liquid System for Inverted Roofs - IKO 1K PU Hybritech