Exterior Metal Linear Closed Ceilings - Exterior metal ceiling system

Linear closed ceilings are created using panels of either the same width or by varying the sizes to create a smooth and uninterrupted design. This smooth appearance is achieved using a beveled edge on the ceiling panels.

Features and benefits:

• All ceiling systems are tested for resistance to wind loads.
• Panels can be supplied in any length up to 6000 mm (as standard), have a thickness of 0.5 mm and are made from a high-corrosion resistant aluminium alloy.

-75C/ 150C/ 225C:

• Closed aluminium ceiling panels, when installed create a closed smooth appearance.
• All three widths can be clipped to a universal aluminium carrier.
• Panels are locked on the carrier with a special fixing clip (150C/ 225C panels only).
• Even when locked the panels are fully demountable with a simple tool allowing full access to services and equipment in the plenum.

-84C:

• Slender, 84 mm wide box shaped panels with 16 mm closed joints that enhance the linear appearance.
• Panels with integrated join flanges provide a visually closed ceiling.
• If required the panels can be finished with the patented Luxacote® paint system.

-150F/ 200F:

• Large panel sizes up to 200 x 6000 mm.
• All panel modules are produced with a small optical bow, to control the effects of thermal expansion.
• Panels can be fixed on carriers.