Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 150 mm wall thickness)

Everdry is a stepped cavity tray system. This product is for blockwork or stonework construction of regular 225 mm course heights, at the abutment of roofs (having a pitch of 12.5° or greater) with cavity walls having a cavity width between 50 mm and 125 mm and with an external leaf thickness of 150 mm.

Features:

• Project specification and scheduling service available.

• 150 mm high back upstand exceeds minimum requirements.

• Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework.

• Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.

• Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.

• Lengths available for roof pitches of 12.5°–22.5° and 25° or above.

• The system is available on request with pre-applied polystyrene strips. Polystyrene is much easier to rake out than mortar and offers a visual locator of the cavity tray so aiding the installation of post fitted lead work.

• BBA approved.