Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 125 mm wall thickness)
A stepped cavity tray system for masonry construction.
Everdry is a stepped cavity tray system. This product is for blockwork or stonework construction of regular 225 mm course heights, at the abutment of roofs (having a pitch of 12.5° or greater) with cavity walls having a cavity width between 50 mm and 125 mm and with an external leaf thickness of 125 mm.
Features:
- Project specification and scheduling service available.
- 150 mm high back upstand exceeds minimum requirements.
- Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework.
- Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf.
- Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required.
- Lengths available for roof pitches of 12.5°–22.5° and 25° or above.
- The system is available on request with pre-applied polystyrene strips. Polystyrene is much easier to rake out than mortar and offers a visual locator of the cavity tray so aiding the installation of post fitted lead work.
- BBA approved.
Features | Project specification and scheduling service available 150 mm high back upstand exceeds minimum requirements Permanent stopend protects the perpendicular joint and cuts out water backtracking along the stonework Angled section between cavity tray base and rear upstand automatically sheds water to the outer leaf Cavity tray builds into the outer leaf only to speed up installation and allow both inner and outer leafs to be built independently if required Lengths available for roof pitches of 12.5°–22.5° and 25° or above The system is available on request with pre-applied polystyrene strips. Polystyrene is much easier to rake out than mortar and offers a visual locator of the cavity tray so aiding the installation of post fitted lead work BBA approved |
Material | 2 mm thick medium density polyethylene |
Uniclass 2015 | |
CAWS | F30/370 Preformed cavity trays F30/56 Preformed cavity trays |
Product Reference | Everdry Stepped Cavity Tray 225 mm Course Height and 125 mm Wall Thickness |
Location | As shown on drawings |
Roof pitch | ___°12.5° and above. |
Cavity width | ___ mmWithin range 50 mm to 125 mm. |
Intermediate tray right hand product code | Not required7203Length 625 mm, cavity 50–74 mm, for roof pitches 25° and above. 7203PAs above with polystyrene strip. 7205Length 625 mm, cavity 75–99 mm, for roof pitches 25° and above. 7205PAs above with polystyrene strip. 7207Length 625 mm, cavity 100–125 mm, for roof pitches 25° and above. 7207PAs above with polystyrene strip. 7213Length 1250 mm, cavity 50–74 mm, for roof pitches 12.5° to 22.5°. 7213PAs above with polystyrene strip. 7215Length 1250 mm, cavity 75–99 mm, for roof pitches 12.5° to 22.5°. 7215PAs above with polystyrene strip. 7217Length 1250 mm, cavity 100–125 mm, for roof pitches 12.5° to 22.5°. 7217PAs above with polystyrene strip. |
Intermediate tray left hand product code | Not required7204Length 625 mm, cavity 50–74 mm, for roof pitches 25° and above. 7204PAs above with polystyrene strip. 7206Length 625 mm, cavity 75–99 mm, for roof pitches 25° and above. 7206PAs above with polystyrene strip. 7208Length 625 mm, cavity 100–125 mm, for roof pitches 25° and above. 7208PAs above with polystyrene strip. 7214Length 1250 mm, cavity 50–74 mm, for roof pitches 12.5° to 22.5°. 7214PAs above with polystyrene strip. 7216Length 1250 mm, cavity 75–99 mm, for roof pitches 12.5° to 22.5°. 7216PAs above with polystyrene strip. 7218Length 1250 mm, cavity 100–125 mm, for roof pitches 12.5° to 22.5°. 7218PAs above with polystyrene strip. |
Stop end starter tray product code | Not required7233Length 450 mm, cavity 50–74 mm, for right or left hand applications. 7233PAs above with polystyrene strip. 7235Length 450 mm, cavity 75–99 mm, for right or left hand applications. 7235PAs above with polystyrene strip. 7237Length 450 mm, cavity 100–125 mm, for right or left hand applications. 7237PAs above with polystyrene strip. |
Corner starter tray right hand product code | Not required7243Length 550 mm, cavity 50–74 mm. 7243PAs above with polystyrene strip. 7245Length 550 mm, cavity 75–99 mm. 7245PAs above with polystyrene strip. 7247Length 550 mm, cavity 100–125 mm. 7247PAs above with polystyrene strip. |
Corner starter tray left hand product code | Not required7244Length 550 mm, cavity 50–74 mm. 7244PAs above with polystyrene strip. 7246Length 550 mm, cavity 75–99 mm. 7246PAs above with polystyrene strip. 7248Length 550 mm, cavity 100–125 mm. 7248PAs above with polystyrene strip. |
Ridge tray product code | Not required7262Length 625 mm, cavity 50–74 mm. 7262PAs above with polystyrene strip. 7263Length 625 mm, cavity 75–99 mm. 7263PAs above with polystyrene strip. 7264Length 625 mm, cavity 100–125 mm. 7264PAs above with polystyrene strip. |
Standard product features | Material: 2 mm thick medium density polyethylene. Colour: Black. |
Acousdpc Vertical Cavity Stops
Acoustop Thermal and Acoustic Cavity Stop Socks
Active-guard Gas Barrier Cavity Trays
Arch Window Cavity Tray
Bulls Eye Window Cavity Tray
Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 100 mm wall thickness/ lead)
Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 125 mm wall thickness/ lead)
Everdry Stepped Cavity Tray for Blockwork (225 mm coursing/ 150 mm wall thickness/ lead)
Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 100 mm wall thickness)
Everdry Stepped Cavity Tray for Blockwork Unleaded (225 mm coursing/ 150 mm wall thickness)