NBS Source
I'm a manufacturer

Watco Epoxyline

Verified by manufacturer 4 months ago

Watco UK Ltd

Industrial strength, line marking paint. Available in 190 RAL colour variations.

Jump to:
+44 (0)1483 418418 Website

Application

Surface preparation

All surfaces should be clean and dry before application. On painted or sealed surfaces remove any poorly bonded material and abrade well-bonded paint or sealer to provide a key. A trial area is recommended on smooth, shiny surfaces to test adhesion. Edges of lines should be defined with masking tape.


Mixing

Thoroughly stir the contents of the smaller resin tin before emptying it into the larger curing agent tin. It is very important that all the contents of the resin tin are decanted and thoroughly mixed with the curing agent with a wide-bladed tool until an even colour is obtained.


Application

If appearance is critical we recommend the application of a small trial area first.

Best results are achieved in warm (minimum 15°C), dry conditions with good air circulation. In very high temperatures (30°C and above) it is recommended that bare concrete is lightly dampened first with water. Ideally, use a brush and apply sufficient paint to obliterate the substrate. Do not overbrush. Remove masking tape 1 to 2 hours after painting.

Description

A line marking paint for use in heavy wear areas or areas subject to chemical spillage. This two-part epoxy resin formulation can be applied with a brush or a roller and has excellent resistance to abrasion and harsh chemicals.


Features and benefits:

  • It can be applied to bare concrete or well-bonded paint.
  • Touch dry overnight. Full chemical resistance in 5 days.
  • Virtually solvent free and odourless.


Areas of use:

  • Heavy wear areas
  • Areas subject to chemical spillage
  • Safe traffic routes on floors
  • Highlighting hazards such as step edges



Recommended for internal use only. For exterior use Watco Toughline

General information

Color

White

Yellow

Beige

Black

Blue

Show more

Finish

Semi-gloss

Guidance for specification option:

A brush-applied coat on most surfaces will produce a tough semi-gloss finish.

Material

Epoxy resin

Guidance for specification option:

Water based.

Uniclass

Pr_35_31_85_47 Line marking paintsPrimary
Pr_35_31_22_18 Concrete floor paints

CAWS

M60/195 Special coating

M60/18 Special coating

Product range

Paints and Coatings / Line Marking Paints
Line Marking / Line Marking Paints

Specification data - Line marking paints

Purpose

Highlighting hazard areas, and identifying safe traffic routes for employees and visitors to the site.

Colour

Beige.

Black.

Blue.

Brown.

Green.

Grey.

Orange.

Pink.

Purple.

Red.

Teal.

White.

Yellow.

Volatile organic compound (VOC) level

10 g/L.

Sustainability data

Country of product manufacture

United Kingdom

Literature

Technical Data Sheet: Epoxyline

Technical Data Sheet: Epoxyline

Case studies

Water bottling plant - anti slip floor coating/ line marking paint

Water bottling plant - anti slip floor coating/ line marking paint

Similar products from Watco UK Ltd

Chemi-Coat® Acid Strength

Chemi-Coat® Acid Strength

Chemi-Coat® Range

Chemi-Coat® Range

Cold Set Coating

Cold Set Coating

Epoxicote High Build

Epoxicote High Build

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Rapid

Epoxicote High Build Rapid

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Food Safe Coating

Food Safe Coating

Protecta-Coat Range

Protecta-Coat Range

Roadmarker

Roadmarker