EPDM Drain Connectors and Outlets

Application

For use with downpipes drainage holes.

Description

Tough, durable and flexible drain connector, used for downpipes and circular outlets on a roof or terrace within the main body of a concrete deck.

Suitable for EPDM or bituminous roof membranes.


Features and benefits:

  • Recessed allowing water flow to enter pipes immediately.
  • Slope allows for faster flow.
  • Corner fitting and flange can be sandwiched between two layers of waterproofing membrane.
  • Holes throughout the face, waterproof seal.
  • Easy installation.
  • Backflow of water is limited due to design.
  • It is suitable with SBS and APP bituminous membranes, including built-up felt, mastic asphalt, hot melt and other liquid applied membranes and consists of a spigot which is inserted into a hole to connect to the outlet drainage pipe and a flange which is sandwiched between two layers of waterproofing membrane.
  • The flange is perforated with a series of holes around the profile to allow the membrane underneath to pass through the holes and give a secure bond when the second layer of membrane is installed above it.
  • The spigot is manufactured in a slight cone shape to give easy installation and to prevent it from rising out of the hole.
  • There are also multiple rings on its exterior, which help to ensure that no water can travel back up.
  • The drain connectors are designed to sit inside an HDPE outlet pipe with a snug fit and a range of size options are available in relation to the relevant outlet pipe size.

General information

Color

Black

Material

EPDM

Ethylene Propylene Diene Monomer rubber

Size

250 x 40–200 mm

250 mm long spigot; mouth from 40 mm to 200 mm diameter

WarrantyDescription

15 years

Limited warranty

Uniclass 2015

Pr_65_50_35_37 Gravity rainwater outletsPrimary

CAWS

R10/26 Proprietary rainwater outlets

R10/365 Proprietary rainwater outlets

Specification data - Gravity rainwater outlets Enhanced data

Material

EPDM.

Integral accessories

None.

Gravel excluder.

Leaf guard.

Product Reference

EPDM Drain Connectors and Outlets

Outlet pipe (diameter):

40 mm.

50 mm.

60 mm.

75 mm.

80 mm.

Show more

Couplings

Not required.

Required.

To suit drainage outlet.

Environmental information

Country of material origin

United Kingdom

Country of product manufacture

United Kingdom

Recyclability

100%

Literature

Pedestals & Support Pads Brochure

Pedestals & Support Pads Brochure

Similar products from Wallbarn Ltd

EPDM Corner Fittings

EPDM Downpipe Outlets (Perforated Flange)

EPDM Downpipe Outlets (Perforated Flange)

EPDM Downpipe Outlets (Smooth Flange)

EPDM Downpipe Outlets (Smooth Flange)

EPDM SIPHON Outlet

EPDM SIPHON Outlet

EPDM Through Wall Outlets

EPDM Through Wall Outlets

PVC Circular Drain Connectors and Outlets

PVC Corner Fittings - Round Spigot

PVC Corner Fittings - Round Spigot

PVC Corner Fittings - Square Spigot

PVC Corner Fittings - Square Spigot

PVC Through Wall Outlets

PVC Through Wall Outlets

Round Gravel Excluder Helix

Round Gravel Excluder Helix