A two-pack high build epoxy coating, formulated to provide excellent finish and application properties.
Enamelcoat is a solvent-free, high-build coating designed for use in virtually any industry where floors and walls need to be both protected and decorative in appearance. The coatings are fast curing, easy to clean and maintain and are chemically resistant.
Flexijoint suits all manner of construction methods, including crack induced/ sawn joints and pre-formed expansion joints as well as coved skirting details and other finishing requirements.
Existing surfaces must be clean, dry and free from contamination, which can prevent the effective adhesion of coatings and screeds. For heavily oil contaminated surfaces, the concrete should be shotblasted and maybe subjected to hot compressed air (HCA) followed by a holding primer of WD Bonder or WD Aquatect. Conren recommend mechanical preparation for most substrates prior to installation of epoxy resin coatings/ screeds and offer a range of primer systems to suit most situations.
Hygienic, durable, hygienic, chemical resistant, solvent free
All warranties provided are based on each individual project - dependant on environmental and maintenance factors
Conren offers a range of primer systems to suit most situations. WD Bonder is the standard primer following mechanical preparation. WD Aquatect, water vapour suppressant/ primer should be used where the moisture content in a new concrete slab exceeds 75% RH, e.g. in fast track construction projects. WD Aquatect improves surface adhesion and bonding of the flooring system to new concrete or where the presence of a DPM is suspect.
Other colours can be formulated on request, from both the BS 4800 and RAL colour groups; consult manufacturer for details.