Verified by manufacturer 11 months ago
Two-component, highly flexible S2 rapid set adhesive with extended open time for the installation of natural and agglomerate stone, ceramic and porcelain tiles.
Elastorapid is for interior and exterior bonding of tiles and stone to walls and floors. It is suitable for all sizes and types of tiles: single fired, double fired, porcelain, clinker, terracotta etc., natural stone and artificial materials.
A two component, quick setting, highly deformable, high performance non-slip cement-based adhesive with extended open time for ceramic tiles and natural stone.
Elastorapid may be applied to vertical surfaces without slumping. It has high bonding strength after only 2–3 hours; floor and wall surfaces can be put into service very quickly.
Elastorapid is a cementitious (C) improved (2) fast setting (F) tile adhesive with reduced slip (T), extended open time (E) and highly deformable (S2) characteristics, classified as C2FTE-S2 in accordance with EN12002.
Do not use Elastorapid on metallic, rubber, PVC or linoleum surfaces.
Special cement binder, selected silica sand and synthetic latex rubber.
M40/115 Natural stone covering to
M40/10 Natural stone covering to
M40/110 Tiling to
M40/5 Tiling to
Open time (minimum)
≥ 30 minutes.
Component A, powder. Component B, liquid.
For light foot traffic.
Country of product manufacture
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.