NBS Source
I'm a manufacturer
Compare variants

ED 100 Full Energy and ED 250 Full Energy

Verified by manufacturer 6 months ago

EDA 100A Door Operators

dormakaba UK & Ireland Ltd Variant:

Full energy swing door operators.

Jump to:
+44 (0)1462 477600 Website

Application

Independently tested under the Certifre scheme as suitable for 60 minute fire rated doors for both push and pull applications.


See Cerificate of approval for more details.

Description

These units offers a range of operating modes that enable the door to be opened under power when required and used as a conventional manual swing door at all other times. The ED 100A/ ED 250A opens the door at precise controlled speeds and forces assuring safety for all users. The door can be opened manually or automatically via radar detector, push pad or access control. As ED 100A/ ED 250A operate under full energy additional safety equipment must be fitted. The combination of low operating noise levels and the compact Contur design ensures the ED 100A/ ED 250A will integrate into the most sensitive of environments. Both operators may be installed as push-version with standard arm and as pull-version with slide channel.

Features and benefits:

  • Elegant visual appearance: dormakaba Contur design provides an operator height of only 70 mm.
  • Low noise levels through multi-stage gearing.
  • Efficient closing due to an electronic latching action enabling the motor to support the spring to overcome doors seals, room to room pressure differentials and wind loads.
  • Additional safety equipment: Compatible with IRS-4 and FLATSCAN safety sensors.
  • Optional integrated door coordinator to ensure the correct closing of rebated double doors.

Product options:

-ED 100A

  • Maximum door-leaf weight for lintel depths of up to 300 mm: 160 kg.
  • Door-leaf width for single-leaf version: 700–1100 mm hinged, 770–1100 mm pivoted (based on 70 mm pivot centres).
  • Door-leaf width for double-leaf version: 1450–2200 mm hinged, 1590–2200 mm pivoted (based on 70 mm pivot centres).
  • Lintel depth for slide channel: ± 30 mm.
  • Lintel depth for standard arm: 0–300 mm.

-ED 250A:

  • Maximum door-leaf weight for lintel depths of up to 300 mm: 400 kg.
  • Maximum door-leaf weight for lintel depths from 301 to 500 mm: 160 kg.
  • Door-leaf width for single-leaf version: 700–1600 mm hinged, 770–1600 mm pivoted (based on 70 mm pivot centres).
  • Door-leaf width for double-leaf version: 1450–3200 mm hinged, 1590–3200 mm pivoted (based on 70 mm pivot centres).
  • Lintel depth for slide channel: ± 30 mm.
  • Lintel depth for standard arm: 0–500 mm (0-350 mm for fire protection).

General information

Color

Silver

Other

Finish

Anodized

Guidance for specification option:

Silver aluminium.

Powder-coated

Material

Aluminium

Shape

Rectangle

Length

685 mm

Width

70 mm

Height

130 mm

Warranty description

One year

Uniclass

Pr_30_36_59_15 Controlled door closersPrimary

CAWS

P21/12 Controlled door closers

P21/410 Controlled door closers

Product range

Automatic Doors / Operators / Swing Door Operators

Specification data - Controlled door closers

Form

Overhead.

Materials and finishes

-

Bodies

Cast aluminium.

Arms

Cast aluminium.

Casings

Anodized aluminium.

Colour

Polyester powder coated, RAL.

Guidance for specification option:

Insert requirements.

Silver anodized aluminium.

Type

Single operator.

Double operator.

Manufacturer guidance

Application.

Accessories

Eagle 1 motion detector, black.

Eagle 1 motion detector, silver.

Eagle 1 motion detector, white.

Hingsafe back edge protection, brown.

Guidance for specification option:

PVC-U.

Hingsafe back edge protection, white.

Guidance for specification option:

PVC-U.

Show more

Cover

Single cover at 685 mm to span a single operator.

Two single covers 1400 mm (minimum) with VARIO infill tow span both operators.

Professional continuous cover 1400 mm (minimim) to span over both operators.

Arms

Push side.

Guidance for specification option:

Operator to be installed onto the Push side of the door using standard scissor arm with a max revel depth of 300 mm (ED100) or 500 mm (ED250).

Pull side.

Guidance for specification option:

Operator to be installed onto the Pull Side of the door with slide channel with a max revel depth of +/- 30 mm.

Closing

To EN 1154, EN 2–4, adjustable.

Manufacturer guidance

Closing force.

Program switch

Not required.

Mechanical.

Mechanical and lockable.

Fully electronic.

Dimensions

685 x 70 x 130 mm.

ESR door co-ordinator

Not required (single doors).

Required (double rebated doors).

Extension

30/ 60 mm.

Manufacturer guidance

Axle extension.

Operation

Manual open, motor assisted close.

Guidance for specification option:

Door can be opened manually; the opening safety sensors are operational. Door will close with motor assistance, max force 150 N.

Radar detection.

Guidance for specification option:

Door can be opened under power by radar detection, using a push pad or access control on either side of the door. The safety sensors will be active.

Power (fail safe).

Guidance for specification option:

The operator can fully open under power (fail safe) on receipt of fire alarm signal.

Spring strength

24 N (EN 4).

Manufacturer guidance

Maximum closing spring force.

Sensors

MotionIQ.

Eagle Artek.

Manufacturer guidance

Radar motion sensors.

Safety devices

2D Flatscan SW time of flight safety sensor fitted to opening and closing side of each door leaf to monitor leading edge with roller blind for hinge protection.

2D Flatscan SW time of flight safety sensor fitted to opening door leaf and 3D Flatscan time of flight activation and safety sensor fitted to the closing side monitoring the hinge (no roller blind required).

3D Flatscan SW time of flight activation and safety sensor fitted to opening and closing side of each door leaf to monitor leading edge and hinge areas.

Framed glazed safety barrier with toughened glass infills installed along the line of doors in the open position.

Self-regulating safety system monitoring all door movements including closing force as standard.

Power supply

Not required.

Integrated power supply.

Guidance for specification option:

  • Integrated power supply to maintaining automatic operation in the even of power failure.
  • Battery pack can provide up to 600 cycles for singles doors and 300 cycles for double door (depending on the application and connected hardware).

Manufacturer guidance

Integrated emergency power supply.

Locking facility

Not required.

dormakaba SVP Lock.

Surface applied electromagnetic.

Manual keyed cylinder and lock (operator must by powered off before lock engaged).

Power consumption

120 W.

Speed

Opening and closing: 27° per second (maximum).

Door leaf

700–1100 mm.

Guidance for specification option:

Single-leaf version, hinged.

Single-leaf version, pivoted (based on 70 mm pivot centres).

1450–2200 mm.

Guidance for specification option:

Double-leaf version, hinged.

1590–2200 mm.

Guidance for specification option:

Double-leaf version, pivoted (based on 70 mm pivot centres).

Depth

±30 mm.

Guidance for specification option:

Lintel depth for slide channel. (Lintel depth for standard arm: 0–300 mm).

Weight

For doors with weight of up to 100 kg.

Width

For doors with width of up to 1100 mm.

Sustainability data

Contains Red List materials

Yes

Guidance for specification option:

Lead(Pb): 7439-92-1 (CAS-No) is used in the steel alloy. The concentration of lead in the alloy does not exceed 0.35% (by mass).

Country of material origin

Germany

Country of product manufacture

Germany

Embodied carbon

A1-A3 (production stage) as defined in BS EN 15804

-

Manufacturer guidance

  • Refer to EPD.
  • Environmental Product Declaration (EPD) EPD-DOR-20220318-CBA2-EN.

Recyclability

-

Manufacturer guidance

  • Refer to EPD.
  • Environmental Product Declaration (EPD) EPD-DOR-20220318-CBA2-EN.

Recycled content

As defined in clause 7.8 of BS EN ISO 14021

-

Manufacturer guidance

  • Refer to EPD.
  • Environmental Product Declaration (EPD) EPD-DOR-20220318-CBA2-EN.

BIM objects

Platform Compatible Version
Revit
-

1

Case studies

Transport for Greater Manchester Cycle Hub

Transport for Greater Manchester Cycle Hub