NBS Source
I'm a manufacturer

ECP 526 Extra Conductive Coloured Waterbased Epoxy Coating, With Enhanced Anti-slip Properties

Verified by manufacturer 7 months ago

TBA Protective Solutions

Conductive coloured two pack waterbased epoxy coating with enhanced anti-slip properties.

Jump to:
+44 (0)1706 647 718 Website

Application

ECP526 Extra is suitable use as a floor coating (particularly where the previous coating is unknown, as solvent will attack many coatings, causing them to lift). Particularly suitable for floor coatings in ATEX areas.


Suitable for electrical industry, petrol/chemical industries, water treatment plants, hospitals, food industry - machinery and surfaces.

Description

ECP 526 is a high quality water borne two pack epoxy system.


Features and benefits:

  • Environmentally friendly, it offers the advantages of low odour, and easy cleaning of equipment with water and anti-slip properties.
  • The coating has an advantage over conventional anti-slip coatings as it can be applied by virtually any method, including spraying.
  • It is very aesthetically appealing as it is made without the traditional additives used in anti-slip coatings such as grit and metal shards and provides a silky matte finish.
  • ECP526 Extra exhibits excellent mechanical properties, which withstand abrasion and impact, as well as good resistance to a wide range of chemicals including oils, fats, solvents, acids and alkalis.
  • Electrical properties of the paint are permanent, not affected by humidity.
  • Conductive underlay is not required for grounding the system.
  • ECP526 Extra provides the option of directly grounding racking/shelving used for storing ESSD's to the floor.


Two-pack mixing ratio: 4:1 (Four parts water-based epoxy to one part hardener).


Cleaning: Use warm soapy water before curing complete.

General information

Color

Grey

Manufacturer guidance

Other colours available subject to agreement on shade and minimum quantities. Please consult manufacturer and insert requirements.

Finish

Anti-slip

Matt

Guidance for specification option:

Silky matt.

Material

Epoxy

Guidance for specification option:

Water based.

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_68_70 Resin floor coatingsPrimary
Pr_35_31_85_04 Anti-slip floor coatings
Pr_35_31_85_80 Slip-resistant surface treatments

CAWS

M41/470 Applied slip resistant

L30/585 Applied slip-resistant

M12/110 Resin flooring

M12/120 Resin flooring

M60/195 Special coating

M60/180 Floor coating

M41/470 Applied slip resistant

Specification data - Resin floor coatings

Colour

Light grey.

Execution

-

Manufacturer guidance

The base paint must be thoroughly mixed to ensure complete dispersion of the conductive medium.

Hardener should be thoroughly mixed into the base paint in the ratio four parts of base paint to one part hardener.

Coating is best applied by means of a spray gun to harness the full potential of the anti-slip properties. Can also be applied by brush or roller.

Electrical resistance

<10⁶ Ω.

VOC Content (maximum)

20.34 g/L.

pH

8.5.

Slip Potential - Slip resistance value (SRV) (minimum)/ Pendulum test value (PTV) (minimum)

Dry: 65; wet: 55 (sprayed); Dry: 64; wet: 35 (rollered); Dry: 60; wet: 36 (brushed).

Flash point

163°C.

Specific gravity

1.370 g/cm³.

Storage

Six months in original sealed containers.

Pot life

One hour at 20°C.

Viscosity

2.5 poise ICI cone and plate.

Thinning

10-20% of water (thin after mixing the two parts).

Drying time

Firm dry: 16 hours; Hard dry: three days.

Solids content

58% (approximately).

Sustainability data

Contains Red List materials

No

Literature

ECP 526 Extra - Conductive Coloured Two Pack Waterbased Epoxy Coating with enhanced Anti-Slip properties

ECP 526 Extra - Conductive Coloured Two Pack Waterbased Epoxy Coating with enhanced Anti-Slip properties

Floorshield Concrete Floor Treatments Product Listing

Floorshield Concrete Floor Treatments Product Listing

Similar products from TBA Protective Solutions

ECP 526 Conductive Coloured Epoxy Coating - Water-Based; Enhanced Anti-Slip

ECP 526 Conductive Coloured Epoxy Coating - Water-Based; Enhanced Anti-Slip