EB200 Bollard

With a traditional design, the EB200 offer a durable alternative to a cast iron bollard. Highly versatile and suited for a wide range of applications, the AUTOPA EB200 houses a galvanized steel core under a rugged medium density polyethylene (MDPE) sleeve. The combination of steel and MDPE make the EB200 100% recyclable.

Features and benefits:

• The sleeve is fully removable, and can be easily replaced if damaged.
• The bollard is supplied concrete in and black as standard.
• Flanged and removable versions are available.
• Reflective bands can be added to the neck of the bollard if required.

Installation:

• Flanged bollards require bolting down to a suitable concrete surface (no less then 300 mm cube) by means of two M12 bolts.
• Ragged versions require setting with concrete into a hole of at least 300 x 300 x 450 mm (length x width x depth).
• Removable bollards require an excavated hole of at least 300 mm square and 500 mm deep for the socket.
• An Allen Key is required to tighten the steel clamp that fixes the sleeve to the core.
• To prevent against vehicle access, AUTOPA recommends the distance between bollards does not exceed 1200 mm.