NBS Source
List your products
DPR Sand Fine, Sand Coarse And Sand Smooth

DPR Sand Fine, Sand Coarse And Sand Smooth

Third party certifications:
  • BBA Agrément Certificate

    BBA Agrément Certificate

    Certificate type

  • QA Certificate

    QA Certificate

    Certificate type

Parex Ltd

Fine, medium or course drag effect textured synthetic decorative coating.

Jump to:
+44 (0)1827 711755 www.parex.co.uk
Description

Pre-mixed, vapour-permeable ready to apply acrylic/ silicone-based decorative coating for external and internal walls. Finished appearance is based upon grain size. Pack size: 29.5 kg bucket. DPR (Dirt Pick-up Resistance) technology. The surface of the coating hardens and does not soften again under heat. The non-tacky surface provides high resistance to the accumulation of dirt, mould and pollutants.

Features:

  • Excellent hiding power and flexibility characteristics.
  • DPR finishes are water-vapour permeable. They do not create a vapour retarder.
  • Product also known as Revlane+ Taloche Fin (Sand Fine) and Revlane+ Taloche Gros (Sand Coarse).

Suitable for:

  • In-situ and pre-formed concrete. If required level the surface first with Parex base coat Maite.
  • Base coats in accordance with BS 13914-1.
  • Parex coloured one-coat renders, e.g. Monorex GF.
  • ParexDirect or ParexTherm range of Thermal Insulation Systems.
  • Advanced Masonry simulation.
  • Parexlanko grey one-coat renders e.g. Parmurex/ Parex waterproofing undercoat systems.
  • Existing flat substrates.
  • Internal walls, drylining plaster (gypsum) substrates. Prepare and apply 310 Primer.
  • Painted substrates: The existing paint must demonstrate adequate adhesion or be removed. Prime the surface with 310 Primer.
  • Parex profiles.

Unsuitable for:

Lime based substrates.

Finishes:

  • Sand Fine and Sand Coarse can create a range of textures and finishes in addition to horizontal dragged or vertical dragged appearances.
  • Sand Smooth is best applied using a spraying technique to achieve a uniform smoothness.
  • The range of differing finishes is commonly used with the Advanced Masonry Simulation system.
  • For additional information on the range of finishes consult the Parex literature referenced DPR Textured Finishes.

Standards:

  • BS EN 13914-1 Code of practice for external rendering.
  • BS 8000 Workmanship on building sites.
  • BS EN ISO 14001:2004.

General information

Features

Excellent hiding power and flexibility characteristics

DPR finishes are water-vapour permeable. They do not create a vapour retarder

Product also known as Revlane+ Taloche Fin (Sand Fine) and Revlane+ Taloche Gros (Sand Coarse)

Uniclass 2015

Pr_35_31_22_81 Solvent-based masonry paintsPrimary

CAWS

M20/130 Cement:sand (air entrained)

M20/160 Proprietary cement gauged render

M20/5 Cement:sand (air entrained)

M21/20 External wall insulation system

M21/210 External wall insulation system

M22/120 Sprayed

Specification data - Solvent-based masonry paints

Product Reference

DPR Sand Smooth

0.5 mm grain size.

DPR Sand Fine

1.0 mm grain size.

DPR Sand Coarse

1.5 mm grain size.

Colour

A wide range of colours is available. Contact manufacturer for colour samples.

Accessories

None

DPR Primer 310

DPR Coating 311

600 Sealer

Accel-Dry Accelerator

Masonry Templates

Parex Profiles

Revlane Fixature

Standard product features

Composition:

Ready-to-use liquid paste containing:

  • Synthetic resins.
  • Mineral fillers.
  • Pigments.
  • Specific admixtures.
  • Performance in fire: M1 classification.

Apparent density:

  • DPR Primer 310: 1.4 kg/ dm³ (1400 kg/ m³).
  • DPR Sand Fine, Coarse, Sand Smooth: 1.86 kg/ dm³ (1860 kg/ m³).

Product Options

Product reference:

Parex are able to offer a DPR Optimum Premium range, which offers increased weather resistance, abrasion resistance, and improved UV stabilisation. Available in finishes: Sand Smooth, Sand Fine and Sand Coarse.

Third party certifications
  • British Board of Agrément (BBA) - certficate : Standard/ Certificate: 10/4275
  • European Technical Approval : Standard/ Certificate: 04/0114 (New 2010 approvals pending)
  • Technical Application Document : Standard/ Certificate: DAT 7/04-1376
  • Irish Agrement Board (IAB) : Standard/ Certificate: 09/0332 and 09/0342
Similar products from Parex Ltd