NBS Source
I'm a manufacturer

Downlight Fire Hoods

Verified by manufacturer 4 months ago

Tenmat Limited

Fire resistant downlight covers for use in ceiling and floor constructions.

Jump to:
+44 (0)161 8722181 Website

Application

  • For use with fire-rated ceilings.
  • Suitable for multi-home buildings.

Description

Tenmat’s Downlight Fire Hoods are manufactured from halogen free intumescent material and are designed to reinstate the fire and acoustic performance of ceilings and/or floor constructions when penetrated by

downlighters or blank openings if lights are removed for maintenance. The DFH is made from an intumescent flexible mineral wool material allowing it to be installed through the hole cut into the ceiling membrane, before springing back into shape to cover the light fitting, whilst allowing enough space between the hood and the light fitting to allow for normal operation of the light fitting.


The DFH also includes small ventilation holes, which allows hotter operating downlighters to ventilate, a small pre-cut hole for the light fitting cable to pass through and a steel clip to hold the hood in place. In the event of a fire the DFH intumescent material will expand to enclose the ceiling cutout, cable and ventholes, providing effective fire resistance for integrity and insulation for 30, 60 or 120 minutes depending upon the ceiling and floor joist construction, even if the downlight is removed and replaced.


Features and benefits:

Technical

  • A fire rated product, reinstating ceiling fire protection up to 120 minutes
  • Tested for minimal acoustic noise transfer, ideal for multi-home buildings
  • Ventilated design – developed to reduce heat build-up within the Firehood enclosure using a ventilated system
  • Suitable for halogen and LED’s - available in 3 sizes: 150 x 150 mm, 200 x 200 mm, 250 x 250 mm

Installation and maintenance

  • Flexible and lightweight - designed to be easily and quickly installed from below ceilings with no special tools required
  • Compatible with new and retrofit solutions - does not need to be removed when changing light fittings
  • No maintenance required after installation.

General information

Color

Black

Material

Mineral wool

Shape

Circle

Length

150 mm

200 mm

250 mm

Manufacturer guidance

Outside diameter.

Height

150 mm

200 mm

250 mm

Uniclass

Pr_70_70_48_48 Luminaire smoke hoodsPrimary

CAWS

V90/510 General purpose luminaires

V90/510 Luminaires

P12/150 Loose fire-stopping

Specification data - Luminaire smoke hoods

Standard

To BS EN 1365-2.

Smoke hoods and blankets

-

Manufacturer guidance

Fire resistance: Provides integrity (E) and insulation (I) for 30, 60 or 120 minutes (EI 30/60/120) depending upon the ceiling and floor joist construction. Consult manufacturer's literature and insert requirements.

Dimensions

150 x 150 mm.

Guidance for specification option:

Cut out size range diameter 50–75 mm.

200 x 200 mm.

Guidance for specification option:

Cut out size range diameter 76–100 mm.

250 x 250 mm.

Guidance for specification option:

Cut out size range diameter 101–140 mm.

Wattage

35 W (maximum).

Guidance for specification option:

LED lamp wattage, in relation to heat output

BIM objects

Platform Compatible Version
Revit
-

1

Literature

Downlight Fire Hood Datasheet

Downlight Fire Hood Datasheet

Similar products from Tenmat Limited

Loft Covers

Loft Covers

Luminaire Covers

Luminaire Covers