NBS Source
List your products
Description

A wide range of door closer accessories are available including angle brackets, mounting plates, hold open devices and guide rails.

Additional product information is available from:

http://www.assaabloy.co.uk/en/local/uk/Products/Door-closers/AA-DC/Accessories/

General information
Specification data - Controlled door closers
Product Reference

DCA104 EV1

Angle bracket.

DCA120

Mounting plate.

DCA121

Mounting plate.

DCA122 EV1

Angle bracket.

DCA123 EV1

Angle bracket.

DCA130 EV1

Mounting plate.

DCA131 EV1

Mounting plate.

DCA132 EV1

Mounting plate.

DCA152

Hold open device.

DCA153

Opening damper.

DCA154 EV1

Parallel arm bracket.

DCG193 EV1

Guide rail.

DCG195 EV1

Guide rail.

DCL190 EV1

Link arm.

DCL191 EV1

Hold open link arm.

Product Options

Product reference:

  • DCA104 EV1 – Angle bracket. For use with sliding arms. For fitting to door frame over 25 mm in depth on push side. Used with ASSA ABLOY DC500 and DC700 Door Closers and ASSA 330 and 250 Door Closers.
  • DCA120 – Mounting plate. For smoke protection doors. Used with ASSA ABLOY DC200 and DC300 Door Closers.
  • DCA121 – Mounting plate.
  • DCA122 EV1 – Angle bracket. For frame installation with deep jamb. Reduces headroom by 70 mm; check for suitability on fire doors. Used with ASSA ABLOY DC200.
  • DCA123 EV1 – Angle bracket. For frame installation with deep jamb. Reduces headroom by 70 mm; check for suitability on fire doors. Used with ASSA ABLOY DC300.
  • DCA130 EV1 – Mounting plate. For metal or timber profile doors. Used with ASSA ABLOY DC340, DC500 and DC700 door closers and ASSA 335 and 330 door closers.
  • DCA131 EV1 – Mounting plate.
  • DCA132 EV1 – Mounting plate.
  • DCA152 – Hold open device. Allows the door to be held in the open position up to 130º. For use with DC194/G195 arm. Not approved for use on fire or smoke doors.
  • DCA153 – Opening damper. Provides enhanced backcheck function to a maximum damping angle of 130º. For use with DC194/G195 arm. Please note use of a floor or wall mounted door stop is still recommended.
  • DCA154 EV1 – Parallel arm bracket. For parallel arm installation (Figure 66). Used with ASSA ABLOY DC200 and DC300.
  • DCG193 EV1 – Guide rail.
  • DCG195 EV1 – Guide rail.
  • DCL190 EV1 – Link arm. Supplied as standard with many door closer. Allows door to open to 180º.
  • DCL191 EV1 – Hold open link arm. Allows the door to be held in the open position to a maximum of 150º, either to allow for cleaning or to permit easier passage at certain times. Not permitted on fire-resisting doors.

Similar products from ASSA ABLOY Opening Solutions UK & Ireland