NBS Source
List your products
Description

DeltaWing is a steel louvred panel system, offering durability and an aesthetic design. It is manufactured with a range of options, offering a choice of total or partial visual screening with a corresponding level of free area for ventilation.

The steel construction creates a robust panel suitable for ground and street-front locations as well as roof-top and elevated situations.

Framed panels are manufactured to custom-sizes for a wide variety of applications such as wall cladding, car park screens, compounds, plant housing, ventilation grilles, balconies and balustrades, wheelie bin stores and brise soleil.

DeltaWing is manufactured from inclined carbon steel flat bars, which are pressure locked to recessed vertical flat bars.

The inclined louvres can be spaced at any increment of 11 mm to provide the required level of visual screening.

  • Louvre flat bars 40 x 2 mm set at 45 degrees, centred at 22, 33, 44, or 66 mm.
  • Vertical flat bars 20 x 2 mm, centred at 132 mm.

Panels and ancillary steelwork can be supplied galvanized only or galvanized and powder coated to any RAL colour.

General information
Finish

Hot dip galvanized

to BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS EN 13438.

Material

Pressure-locked carbon steel S235JR

Uniclass 2015
Facade-aligned brise soleil systems (Ss_25_50_45_30)Primary
Specification data - Facade-aligned brise soleil systems
Product Reference

DeltaWing Cladding and Screening, Louvre Flat Bars Inclined Downwards

DeltaWing Cladding and Screening, Louvre Flat Bars Inclined Upwards

Panel -
Panel Type

DeltaWing–34

34% visual screening; 67% free area.

DeltaWing–45

45% visual screening; 66% free area.

DeltaWing–70

70% visual screening; 65% free area.

DeltaWing–90

90% visual screening; 63% free area.

DeltaWing-100

100% visual screening; 60% free area.

Panel size

Bespoke, 1600 x 1850 mm (h x w, maximum) (exceptionally up to 4 m²).

Framing

50 x 4 mm flat bar

60 x 30 mm angled bar

Finish

Hot dip galvanized

to BS EN ISO 1461.

Hot dip galvanized and polyester powder coated

Insert RAL or BS colour to BS EN ISO 1461 and BS EN 13438.

Standard product features

Material:

Pressure-locked carbon steel S235JR.

Orientation:

Panels are designed with the louvre flat bars inclined downwards to the outside of the enclosed area.

Installation:

Panels are fastened with M10 stainless steel bolts grade A2.

Product Options

Product reference:

Panels can be designed with the louvre blades sloping upwards which provides more effective visual screening for roof-top installation when viewed from ground level.

Panel:

- Size:

Large structural openings are covered by an arrangement of panels. The top and bottom edges of adjoining panels are unframed for continuity of appearance.

Framing:

Panels bolted to structure on both sides in line through 50 x 4 mm flat framing bar or behind louvre at 90 degrees through 60 x 30 mm angled framing bar.

Finishing:

Polyester powder coating is a multi-stage process which applies thermo-setting resins producing a superior finish to painting.

Secondary steelwork:

Secondary support steelwork is designed and supplied as required.

Literature
Similar products from Lang+Fulton