NBS Source
I'm a manufacturer

Danotile

Verified by manufacturer 5 months ago

Knauf UK

A plain, unperforated hygienic demountable gypsum ceiling tile in an exposed T-grid system.

Jump to:
+44 (0)1795 424499 Website

Application

Designed for use in areas of high humidity, high cleaning and infection control. As a clean-room certified gypsum ceiling tile, Danotile is widely used in healthcare facilities and kitchens.

Description

A plain, unperforated hygienic demountable gypsum ceiling tile in an exposed T-grid system, with a white foil covering.


Features and benefits:

  • Clean room certified for rigorous hygiene.
  • The white foil covered robust surface tolerates tough cleaning and disinfection agents with pH levels from 2-13.
  • Demountable for access and wipe clean.

General information

Color

White

Finish

Laminated

Guidance for specification option:

(Foil coated with pre-impregnated non-toxic white or metallic-face paper.)

Material

Gypsum

Guidance for specification option:

Glass fibre reinforced.

Shape

Square

Rectangle

Length

600 mm

1200 mm

Width

600 mm

Height

6.5 mm

9.5 mm

Uniclass

Ss_30_25_22_51 Modular suspended ceiling systemsPrimary

CAWS

K40/10 Unit/ modular suspended ceilings

K40/115 Unit/ modular suspended ceiling system

K40/135 Board-suspended ceiling system

K40/265 Infill units

Product range

Danoline

Specification data - Modular suspended ceiling systems

System performance

Health, hygiene and environment.

Ceiling support

Demountable suspended ceiling grids.

Support fasteners

As schedule.

As drawing.

Guidance for specification option:

Insert drawing reference number.

Guidance for specification option:

  • For 600 x 600 tiles, 12.5 mm thick units of up to 3 k.g. can be installed directly into the panel without reinforcement.
  • For larger module sizes and 6.5 mm thick tiles a reinforcement panel of sufficient strength can be installed behind the tile.
  • The reinforcement panel must extend all the way into the main runners, so that the weight is transferred to them.
  • The total weight should not be greater than 3 k.g. for each m² of ceiling.
  • Where loads are greater than 3 k.g./m², additional hangers must be used.


Units over 3 k.g., should be installed independently, so that they do not place any load on the ceiling.


Insert additional requirements; contact manufacturer for more information.

Ceiling units

Glass fibre reinforced gypsum tiles.

Samples required

Not required.

Guidance for specification option:

Insert requirements; contact manufacturer for more information.

Required.

Finish/ Colour

Factory laminated with a white face.

Guidance for specification option:

White as standard (closest match RAL 9016 Gloss 10).

Factory laminated with a metallic face.

Grid

15 mm lay-in.

24 mm lay-in.

Perimeter trims

Shadow line.

Wall angle.

Grid system

Exposed T-grid with cross tees and hangers.

Fire safety

B-s1, d0.

Light reflectance

86.3%.

Guidance for specification option:

In accordance with DIN 5036.

Weight

6.9 k.g./m².

Surface pattern

Plain.

Edge profile

A.

Construction

As schedule.

As drawing.

Guidance for specification option:

Insert drawing reference number.

Guidance for specification option:

  • Suspension hangers: Knauf 25 x 25 mm angle section at 1200 mm centres (first angle maximum 400 mm from wall).
  • Primary support channel: Knauf 38 mm deep 24 T-grid primary runner at 1200 mm centres (first runner maximum 600 mm from wall).
  • Cross tees: Knauf 38 mm deep 24 T-grid cross tees at 600 mm centres (cross ties available in 1200 mm and 600 mm lengths).
  • Perimeter channel: Use Knauf 20 x 24 mm wall angle or Knauf MS15 shadow line trim (creating 15 mm shadow gap) fixed at 300 mm centres.


Insert additional requirements; contact manufacturer for more information.

Fixing into substrates

As per site requirements.

Guidance for specification option:

Fixings are used to meet performance constraint (confirmation is required from supplier to meet ceiling specification and any additional loading).


Insert requirements; contact manufacturer for more information.

Tile size

600 x 600 x 6.5 mm.

600 x 600 x 9.5 mm.

600 x 1200 x 6.5 mm.

Sustainability data

Country of material origin

Denmark

Country of product manufacture

Denmark

Recyclability

-

Manufacturer guidance

Recyclable.

Literature

Knauf Acoustic and Design Solutions For Hospitals and Healthcare Facilities

Knauf Acoustic and Design Solutions For Hospitals and Healthcare Facilities

Similar products from Knauf UK

Belgravia

Belgravia

Contur

Contur

Corridor 400

Corridor 400

Plaza

Plaza