CS Wallglaze® Wallflex®

Features:

• Controls the growth and spread of microbes by incorporating non-leaching anti-microbial additives in all system layers.

• Easily cleaned and resistant to strong cleaning agents and low concentrations of aggressive chemicals.

• Can be radiation decontaminated (complies with Health Building Note 26 'Facilities for Surgical Procedures: Volume 1').

• Will allow minimal water to permeate through the film.

• Colour and UV stable and has a low VOC.

• System incorporating hygienic mastic should be used in areas where positive/negative pressure or temperature cycling occurs and when system is applied in wet areas (e.g. bathrooms/shower areas).

Usage:

• Healthcare: operating theatres, treatment rooms, cat. 1, 2 and 3 ACDP clean rooms/laboratories, X-ray areas.

• Food and pharmaceutical process areas requiring surface finishes with high chemical resistance.

• Schools - laboratories and heavily trafficked corridors.

• Swimming pool halls and changing areas.

• Bathrooms/shower rooms.

• Prisons and police stations - cells and communal areas.

• Kitchens - live steam/steam cleaning.

Fire performance:

• BS 476-7: Class 1.

• BS 476-6: Designated 0.

Operational temperature:

Once applied and cured, CS Wallflex is stable in temperatures between -15°C and +80°C.

Colour:

A range of colour options are available, including BS 4800, RAL or NCS 2nd Series type colours. Colour matching to a specific sample can also be achieved.

Finishes:

Eggshell.

Flexible mastic:

• The mastic is a single pack, moisture curing polysiloxane with inbuilt biocides.

• It can be used either underneath or on top of the CS Wallglaze® coatings.

• The mastic is applied via a cartridge gun to all dissimilar surfaces/ materials and any junction that may cause cracking, after the primer but before any undercoat or topcoat.