CS Explovent® XRV-IC Explosion and Pressure Relief Vents for Roofs
Verified by manufacturer 11 months ago
Explosion and pressure relief roof vents for buildings where the exterior wall area is insufficient (internal rooms), or where exterior walls are obstructed.
Application
Any industry where explosion / pressure relief venting is a requirement.
Designed for buildings where the exterior wall area is insufficient (internal rooms), or where exterior walls are obstructed, preventing the use of wall vents.
Description
Explosion-relief roof vents, designed for buildings where the exterior wall area is insufficient (internal rooms), or where exterior walls are obstructed, preventing the use of wall vents.
Features a metal lid held in place by Factory Mutual (FM) approved explosion relief fasteners. The fasteners are designed to collapse under the force of an explosion, releasing the lid and allowing the pressure to vent.
Features and benefits:
- Insulated cover reduces energy and heat loss.
- ATEX and fire code compliant.
- Designed in accordance with N.F.P.A. 68.
- Releases in 12–18 milliseconds of detection.
- Standard release setting between 0.5 and 2 kPa.
- Tandem and cluster units available.
- Pre-fabricated, insulated aluminium kerb.
- Features a restraint cable designed to prevent the unit from becoming a dangerous projectile.
- ATEX-compliant wall panels also available (specified separately).
General information
Color | Beige Black Blue Brown Cream |
Material | Aluminium |
Shape | Rectangle |
Uniclass | |
CAWS | L10/490 Roof ventilators L10/650 Metal louvres L10/47 Roof ventilators L10/54 Louvres |
Specification data - Natural smoke and heat exhaust ventilators
Mounting | Roof-mounted. |
Arrangement | Flap. |
Dimensions | |
Length | Manufacturer guidanceInsert requirements, 1220–2440 mm. |
Width | 1220 mm. |
Height | Manufacturer's standard. |
Controls | Manual (pressure-controlled). |
Initiation | Release pressure rating.Guidance for specification option: Insert requirements; panels can be calibrated to release at pressures between 0.5 and 2 kPa as standard. Consult manufacturer's technical department should you require the release pressure to be set outside of this range, or to calculate total vent area required. |
Materials | |
Ventilator | |
Frame | Aluminium. |
Finish | Mill finish.Guidance for specification option: Standard. Kynar 500 fluorocarbon polymeric coating.Guidance for specification option: Insert colour requirements below. |
Colour | Not applicable.Guidance for specification option: Mill finish only. Kynar 500, Bone White 521.Kynar 500, Phantom Grey 562.Kynar 500, Mushroom 559.Kynar 500, Onyx Grey 560.Kynar 500, Black 512.Kynar 500, Sandstone 519.Kynar 500, Charcoal 549.Kynar 500, Spanish White 516Kynar 500, Sand Beige 571.Kynar 500, Terra Cotta 532.Kynar 500, Seawolf Grey 563.Kynar 500, New Light Bronze 548.Kynar 500, Medium Bronze 543.Kynar 500, Dark Bronze 546.Kynar 500, Cordovan Brown 537.Kynar 500, Interstate Green 580.Guidance for specification option: Premium colour, extra cost applies. Consult manufacturer for details. Kynar 500, Arabian Blue 585.Guidance for specification option: Premium colour, extra cost applies. Consult manufacturer for details. Kynar 500, Colonial White 518.Guidance for specification option: Premium colour, extra cost applies. Consult manufacturer for details. Kynar 500, Forge Red 581.Guidance for specification option: Premium colour, extra cost applies. Consult manufacturer for details. Kynar 500, Banner Red.Guidance for specification option: Premium colour, extra cost applies. Consult manufacturer for details. |
Integral upstands | |
Material | Aluminium. |
Finish | As Frame. |
Colour | As Frame. |
Accessories | None.Proximity switches.Burglar bars. |
Literature
CS Explovent Explosion and Pressure Relief Systems