NBS Source
List your products
Description

Continuous Louvre Blade Linius L.066:

Face mount, vertical panel, weathered horizontal blade, continuous aluminium louvre array, for visual screening, sunshading or ventilation.

  • Provides ventilation in combination with weather protection. Physical free area: 47 %. Rain protection at airspeed 1 m/s (with mesh 2.3 x 2.3 mm): Average.
  • Aluminium profiles with choice of finish. Blade centres (vertical): 66 mm. Blade projection (without brackets): 55 mm.
  • Blades clip onto blade supports type L.066.11. Blade support centres (maximum): 1.4 m.
  • Suitable for spanning varied substrates.
  • Matching louvre-clad doorsets available with top and bottom pivots.

Continuous Louvre Blade Linius L.066P:

  • Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
  • Enables secure ventilation. Physical free area: 77 %.
  • Extruded, rectangular section aluminium profiles with choice of finish. Blades at 66 mm centres. Blade projection (without brackets): 53 mm.
  • Suitable for spanning varied substrates as visual screening.
  • Blades can be matched to Loggia sliding units.
  • Suitable for internal use as vertical screen or open ceiling.

General information

Finish

[Finish, Other anodized or polyester powder coating finishes may be available to special order]

-

Material

Aluminium alloy: EN AW-6063 T66 (AlMg0.7Si)

Uniclass 2015

Pr_30_59_48_04 Aluminium louvre panel unitsPrimary

CAWS

L10/650 Metal louvres

Specification data - Aluminium louvre panel units

Product Reference

Continuous Louvre Blade Linius L.066

Weathered horizontal blade.

Continuous Louvre Blade Linius L.066P

Array

-

Overall dimensions (w x h)

___ x ___ mm

As drawing ___

Brackets

-

Type

LZ.4202

60 x 30 mm (l x w). Engages rear of vertical support profile.

LZ.4203, angle bracket

80 x 80 x 5 mm (height x projection x gauge). Use with LZ.4211.

LZ.4206

60 x 70 mm (l x w). Engages rear of vertical support profile.

LZ.4209, angle bracket

80 x 50 x 4 mm (height x projection x gauge). Use with LZ.4211.

LZ.4211, rotation bracket

Use with angle bracket. Engages rear of vertical support profile.

Submit proposal

Vertical centres

___ mm

Maximum varies with choice of vertical support profile.

As drawing ___

Submit proposal

Vertical support profiles

-

Type

SD.014

40 x 14.5 mm (w x d). Wall or frame mount. Vertical span (maximum): 600 mm.

SD.054

40 x 54 mm (w x d). Wall or frame mount. Vertical span (maximum): 2.1 m.

SD.100

40 x 100 mm (w x d). Capable of spanning between floors. Vertical span (maximum): 3.8 m.

SD.110.11

60.5 x 110 mm (w x d).

SD.110.12

101 x 110 mm (w x d).

LD.0065, vertical framing

30 x 6.5 mm (w x d). Light duty. Wall or frame mount.

LD.0195, vertical framing

36 x 17.5 mm (w x d). Average duty. Wall or frame mount. Vertical span (maximum): 600 mm.

LD.0460, vertical framing

36 x 44 mm (w x d). Heavy duty. Wall or frame mount. Vertical span (maximum): 2 m.

LD.0995, vertical framing

36 x 97.5 mm (w x d). Heavy duty. Capable of spanning between floors. Vertical span (maximum): 2.8 m.

LD.0108

30 x 10.8 mm (w x d). Adaptor profile required for SD.014, SD.054 and SD.100.

Submit proposal

Vertical centres

___ mm

Maximum varies with choice of blade.

As drawing ___

Submit proposal

Blade support clips

-

Type

L.066P.11

For single blade.

L.066P.12

For double blade. Allows thermal expansion.

Vertical centres

___ mm

As drawing ___

Corners

Not required

Corner, mitred externally, angle ___ º, expansion tolerance

Corner, mitred externally, angle ___ º, tight tolerance

Corner, mitred internally, angle ___ º, expansion tolerance

Corner, mitred internally, angle ___ º, tight tolerance

As drawing ___

Submit proposal

Finish (aluminium components)

Anodized, natural

20 µ.

Polyester powder coating, RAL colour ___, sheen ___ %

60–70 µ.

Polyester powder coating, Syntha Pulvin colour ___, sheen ___ %

60–70 µ.

Standard product features

Material:

Aluminium alloy: EN AW-6063 T66 (AlMg0.7Si).

Product Options

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature
Similar products from Renson Fabrications Ltd