NBS Source
Condair HP - High Pressure In-duct Humidifier
Compare variants

Application

Suitable for in-duct, high pressure adiabatic humidification and evaporative cooling applications.

Description

In-duct high-pressure spray adiabatic humidifier and evaporative cooling.


Features and benefits:

  • Water pump and RO treatment station removes minerals from the supply water and pressurizes it directly to the nozzle grid.
  • Integrated optional RO system to remove minerals from the supply water.
  • Energy-efficient RO pump (Grundfos electric motor).
  • Touch screen control panel.
  • Stainless steel, water lubricated high-pressure pump (oil-free), provides water at approximately 70 bar.
  • Valve block provides up to 15 stages of output for +/-4% RH control.
  • Stainless steel, atomizing nozzle grid to provide accurate humidity control.
  • Droplet separator removes unevaporated water droplets from the air stream.
  • Droplet separator drain.
  • Humidification section drain.
  • A ±4% RH control accuracy can be delivered with up yo 15 stages of output across the nozzle grid.
  • This master/slave configuration can be used in a wide range of applications, where up to 1,300 kg/hr of humidification is required.


System components (RO option):

  • RO water storage tank.
  • Control panel.
  • RO membrane.
  • High-pressure pump.
  • RO pump.
  • Stage valve block.
  • Nozzle grid.
  • Droplet separator.

General information

Shape

Rectangle

Color

Silver

Material

Stainless steel

Steel

Size

  • Width: 850–4900 mm.
  • Height: 300–3000 mm.

1300 x 660 x 500 mm

HP Pumpstation, H x W x D.

1600 x 860 x 700 mm

HPRO Pumpstation models 100–500, H x W x D.

1600 x 1400 x 700 mm

HPRO Pumpstation model 800, H x W x D.

Uniclass

Pr_65_67_39_28 Evaporative humidifiersPrimary

Specification data - Evaporative humidifiers Enhanced data

Accessories

Not required.

Reverse osmosis water treatment system.

Conductivity sensor.

Integrated water meter.

UV water treatment.

Self-regenerating ion exchange softener.

Activated carbon pre-filters.

BMS gateway board.

LonWorks or BACnet IP/ BACnet MSTP.

High capacity variable frequency drive (VFD).

Dimensions

  • Pumpstation dimensions: H x W x D.
  • Width AHU/ duct (min–max): 850–4900 mm.
  • Height AHU/ duct (min–max): 300–3000 mm.

1300 x 660 x 500 mm.

Weight

50–65 kg.

Performance

100 L/h.

Pressure

1–4 bar.

Water pressure required.

Quality

5–30 μS/cm.

Water quality requirement.

NominalSupplyVoltage

400 V, 3 Phase, 16 A.

Power consumption

0.5 kW.

RelativeHumidity

7 stages: ±5% RH, 15 stages: ±4% RH.

Velocity

0.5–4 m/s.

AHU/ duct air velocity.

Ingress protection (IP) rating

IP54.

Pumpstation.

Literature

Condair HP High Pressure In-Duct Spray Humidifier

Condair HP High Pressure In-Duct Spray Humidifier

Case studies

Wellcome Trust Condair HP Humidifier

Wellcome Trust Condair HP Humidifier

Similar products from Condair Limited

Condair DL - Hybrid Spray / Evaporative Humidifier

Condair DL - Hybrid Spray / Evaporative Humidifier

Condair JetSpray - Compressed Air & Water Spray Humidifier

Condair JetSpray - Compressed Air & Water Spray Humidifier

Condair ME - Evaporative Humidifier / Cooler

Condair ME - Evaporative Humidifier / Cooler

Defensor PH15

Defensor PH15

Defensor PH28 - Mobile Humidifier

Defensor PH28 - Mobile Humidifier

ML High Pressure In-Room Spray Humidifier

ML High Pressure In-Room Spray Humidifier