NBS Source
I'm a manufacturer
Compare variants

Watco Concrete Floor Paint

Verified by manufacturer 4 months ago

Watco Concrete Floor Paint

Watco UK Ltd Variant:

Single pack floor paint for light traffic areas. 'Anti Slip' and 'Matt' versions are also available. Pre-mixed, easy to apply, available in 190 RAL colours.

Jump to:
+44 (0)1483 418418 Website

Application

Surface preparation

  • Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & CleanWatco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry. 
  • New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating. 
  • Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).


Priming

Is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer


Application

The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours), and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.

Description

Single pack paint for general use and light traffic concrete floors. Solvent based polyurethane formulation.


All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. All tests have been undertaken to ISO standard where applicable, and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.


This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish.


Watco Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. It’s still easy to keep clean and has all the protective benefits of the gloss finish.


Watco Anti Slip Concrete Floor Paint provides a good level of slip resistance and the anti slip particles are pre-blended which makes it easier to achieve a uniform finish.


Features and benefits:

  • Professional quality, single pack polyurethane coating.
  • Transforms and dustproofs drab, stained concrete.
  • Ideal for identifying production and storage areas and traffic aisles.
  • Easy to use and easy to keep clean.
  • Superior performance demonstrated by ISO testing to CE mark EN 1504-2.
  • New formulations to RAL colour shades.


Areas of use:

  • Production areas
  • Warehouses
  • Workshops
  • Corridors
  • Stairwells

General information

Color

Yellow

Blue

Grey

White

Red

Show more

Finish

Gloss

Matt

Anti-slip

Material

Polyurethane (PUR)

Shape

Formless

Length

Bespoke

Width

Bespoke

Height

Bespoke

Uniclass

Pr_35_31_22_18 Concrete floor paintsPrimary
Pr_20_31_86_67 Polyurethane (PU) resins
Pr_35_31_68_70 Resin floor coatings
Pr_35_31_22_15 Concrete finishing coats

CAWS

M60/180 Floor coating

Product range

Paints and Coatings / Anti Slip Floor Paints
Paints and Coatings / Floor Paints
Anti Slip and Safety / Anti Slip Coatings

Specification data - Concrete floor paints

Colour

Hazard Yellow RAL 1018.

Mid Blue RAL 5015.

Blue Grey RAL 7000.

Dark Grey RAL 7015.

Stone RAL 7032.

Mid Grey RAL 7037.

Light Grey RAL 7038.

White RAL 9010.

Tile Red.

Paint finish

Gloss.

Sustainability data

Country of product manufacture

United Kingdom

Literature

Technical Data Sheet: Concrete Floor Paint

Technical Data Sheet: Concrete Floor Paint

Similar products from Watco UK Ltd

Chemi-Coat® Acid Strength

Chemi-Coat® Acid Strength

Chemi-Coat® Range

Chemi-Coat® Range

Cold Set Coating

Cold Set Coating

Epoxicote High Build

Epoxicote High Build

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Anti-slip - 100% solids epoxy resin coating

Epoxicote High Build Rapid

Epoxicote High Build Rapid

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Epoxy Gloss Coat & Epoxy Matt Coat - Two-Part water-based epoxy resin coating

Food Safe Coating

Food Safe Coating

Plant Room Coating

Plant Room Coating

Protecta-Coat Range

Protecta-Coat Range