NBS Source
List your products
Application

Suitable for use in underground stations, car parks and in a wide range of commercial situations where the ability to see through the gate not only deters criminals, but also provides optimum ventilation and vision.

Description

Collapsible gates, designed to provide high security against vandals, burglars and other intruders.

Features and benefits:

  • All gates are custom-made for individual openings, and can be supplied top hung or bottom rolling with the optional facility to be hinged aside for locations on shop entrances, window protection and small openings where a clear width is of prime importance.
  • Manually operated.
  • Built from double channel steel vertical pickets, 16 mm wide x 2.5 mm-thick, interconnected by 6 mm-thick galvanized steel solid lattice bars.
  • All gates are prepared to take a swivel beak lock to accept padlocks by others.

Applications:

Suitable for use in underground stations, car parks and in a wide range of commercial situations where the ability to see through the gate not only deters criminals, but also provides optimum ventilation and vision.

General information
Size

See 'Options' and insert requirements.

Uniclass 2015 Collapsible gate and grille sets (Pr_30_59_24_14)
Specification data
Product Reference

Collapsible Gates

Third party accreditation

Consult manufacturer

Arrangement

Bottom rolling gates

Spearhead gates

Top hung gates

Size

See 'Options' and insert requirements.

Frame location

Face-fixed externally

Face-fixed internally

Fitted between jambs

Fitted beneath lintel

Gate leaf -
Type

Single, left

Bunching to one side.

Single, right

Bunching to one side.

Pair

Bi-parting.

Hardware

Swivel beak lock

Standard; padlock not supplied.

Hook bolt lock

Accessories

None

Plated leading edge

For increased strength and security.

Mid bar gates

For increased security.

Parallel bunch

For limited bunch problems.

Floating gates

Top hung arrangements only.

Standard product features

Weight:

Approximately 32 kg/m².

Product Options

Arrangement:

- Bottom rolling gates:

  • Run on a flat bar bottom track which can be folding or portable for smaller openings.
  • Where the gate is required to hinge aside when bunched, a "T" section top track is used.
  • The weight of the gate is supported by pulleys at the base of the pickets.
  • Hinging aside is not available when the opening size exceeds 1.5 m wide or 3 m high.

- Spearhead gates:

  • Pointed spearheads can be attached to the top of pickets to offer climb-over protection where lintels are not available for head fixings.
  • Spearhead gates run on a flat bar bottom track which is folding or portable. The top track is a folding or portable flat bar. The weight of the gate is supported by pulleys at the base of the pickets.
  • Pairs are supplied with removable centre post and fixing stay.

- Top hung gates:

  • Manufacturer's recommended solution (where possible).
  • Single gates up to 2.5 m high and/ or 3 m wide are suspended from a flat bar top track. This is fixed at each end and has a rounded top edge to facilitate operation. Larger gates have a box type top track.
  • Incorporates channel bottom tracks set into the floor.

Size:

- Bottom rolling gates:

  • Single: Maximum (w x h): 1.5 x 3 m.
  • Pair: Maximum (w x h): 3 x 3 m.

- Spearhead gates:

  • Single: Maximum (w x h): 1.5 x 2 m.
  • Pair: Maximum (w x h): 3 x 2 m.

- Top hung gates:

  • Single: Maximum (w x h): 8 x 6 m.
  • Pair: Maximum (w x h): 16 x 6 m.

Literature
Similar products from Bolton Gate Company