Verified by manufacturer over a year ago
The Classic Tap has a traditional and elegant design. This tap is manufactured from chrome plated heavy brass.
Combining the benefits of no-touch technology with water savings and robust reliable performance, no-touch automatic taps are an ideal choice for washrooms across a wide variety of applications, offering benefits to commercial and public sector environments. Suitable for use by the elderly or disabled and the superior heavy duty construction offers resistance to vandalism and misuse. DVS no-touch taps have been extensively developed and tested to achieve high levels of reliability and consistent performance, combined with attractive design options.
Features and benefits:
- Tap Control System:
The tap control system can be used to control mixed water for one or two taps, or to control both hot and cold on a single tap using two sensors. The control system can be used with wave-on or tactile sensors. The tap control system also features built-in purge control option to avoid stagnation. When a user waves their hand past the sensor (or pushes the tactile switch) the control system activates the solenoid valve, the valve will then run for a pre-set time before automatically closing the valve and stopping the tap.
- Purge controller:
The automatic tap purge controller reduces the risk of Legionella by purging the taps if they have not been operated for a predefined time. Purge run times are adjustable and can be set between 5 seconds and 5 minutes. A periodic purge can be switched on or off.
- Battery backup unit:
The automatic tap battery backup unit will automatically switch from mains supply to battery in the event of a power failure (comes complete with AT00-024 battery pack). When mains power is restored the unit will switch back to mains supply.
Pr_40_20_87_99 Washbasin thermostatic water supply setsPrimary
Water Regulations Advisory Scheme (WRAS) approved.
Finish and colour
Flow rate (maximum)
Classic No-Touch Taps
Single station battery kit standard pressure.
Single station mains kit standard pressure.
Two station mains kit standard pressure.
Three station mains kit standard pressure.
Single station battery kit low pressure.
Single station mains kit low pressure.
Two station mains kit low pressure.
Three station mains kit low pressure.
Automatic tap battery backup unit.
Automatic tap purge controller.
Tap control system.
AC01-001 - hand held programmer with USB interface.
185 x 57 x 121 mm.
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.