Compare

Celcon Vertical Wall Panel - Aircrete

Name: Celcon Vertical Wall Panel - Aircrete
Brand: H+H UK Ltd
SKU: jLrrj6WmdhTWnKYGMH7YGS

Verified by manufacturer 4 months ago

H+H UK Ltd

Third party certifications:

EPD
Certificate type

Vertical Wall Panel

Jump to:

+44 (0)1732 886444 Website

Application

Celcon Vertical Wall Panels are intended for the construction of domestic houses of up to two storey with room in the roof. Three storeys may also be considered subject to an engineering appraisal.

Description

Celcon Vertical Wall Panels are storey-high aircrete panels - fabricated offsite and craned into place for a fast, panelised building system with the reassuring characteristics of a high-performance, durable, masonry structure.

Celcon Vertical Wall Panels are manufactured in a range of heights with a width of 600 mm and a thickness of 100 mm.

Vertical Wall Panels are craned into place onto a bed of H+H element mortar – a fast-setting and very strong thin-layer mortar developed especially for use with the panels.

Features and benefits:

Rapid build.
Cost effective.
High acoustic, thermal and airtight performance.
Increased speed of build.
Aircrete is a durable material. Walls will have a durability equivalent to that of traditional masonry (in excess of 60 years).

General information

Color	Grey
Finish	Matt
Material	Autoclaved aerated concrete (AAC)
Shape	Rectangle
Length	100 mm
Width	600 mm
Height	2325 mm

Uniclass	Pr_20_93_52_05 Autoclaved aerated concrete (AAC) blocksPrimary
CAWS	F10/36 Concrete common blockwork F10/355 Concrete common blockwork F10/37 Autoclaved aerated concrete (AAC) common blockwork F10/360 Autoclaved aerated concrete (AAC) common blockwork

Specification data - Autoclaved aerated concrete (AAC) blocks

Mean compressive strength (minimum)	>4.0 N/mm².
Thermal conductivity (maximum)	0.17 W/mk (at 3% moisture).
Work sizes (length x width x height)	100 x 600 x 2325 mm.
Tolerance category	To BS EN 12602, T3.
Density	575 kg/m³.
Shear bond strength	0.3 N/mm².
Water absorption by capillarity	Not for unprotected use.
Water vapour permeability	05/10.

Weight	116 kg.
Vapour resistivity	50 MNs/gm.
Water vapour diffusion resistance	10.
Mortar	Dunnbettmortel - M10 thin layer mortar supplied in 15 kg bags.
Thickness	100 mm.
Specific heat	1.05 kJ/kgK.
Shrinkage	<0.2mm/m.
Coefficient of linear expansion	8 x 10-6/K.
Air tightness	0.1 m³/hour/m².
AcousticRating	Rw at 100 mm: 40.0 dB unfinished, 42.6 dB lightweight plaster, 45.8 dB, dense plaster.
Fixings The diameter of holes drilled in the blocks should be such that the plug fits tightly prior to the screw being driven. Woodscrews driven direct should not be over tightened. Cut nails driven direct should not be over hammered. The size and length of a fixing should be suitable for the block thickness. Generally, fixings should be spaced from each other (and from the free edge of a block when this is applicable) at a distance not less than the depth of penetration of the fixings into the block; this should be confirmed with the fixing manufacturer. Where a comparison is needed between the performance of a fixing listed and a known requirement, we suggest a Safety Factor of 4 be applied.	Plugged and screwed fixings. Wood screw, Rawlplug, Unifix, Fischer. Nailed fixings. Helifix, Loden. Hammer/ screw fixings. Rawlplug.