NBS Source
List your products
Application

RADDIPLUS T Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. RADDIPLUS T Screed may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene), as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. RADDIPLUS T Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer. Contact SMET for advice on which to use.

Description

CASEA RADDIPLUS T - Thermal Anhydrite Binder is a specially formulated thermal calcium sulphate binder suitable for producing top-quality self levelling (flowing) floor screeds, simply by blending with a suitable sand and water on site or ready-mix plant. RADDIPLUS T complies with EN 13454-1 and is CE marked.

Benefits:

  • Open time as screed: 30–45 mins, depending on ambient conditions.
  • Pumpable – high flowability.
  • Early trafficking.
  • Very low shrinkage.
  • Reduced drying times.
  • CE marked.
  • BS EN 13454-1.

Applications:

RADDIPLUS T Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. RADDIPLUS T Screed may be applied as a levelling screed directly onto a load bearing floor, unbonded on a separating barrier (polythene), as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. RADDIPLUS T Screed should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement based adhesive or smoothing compound is required the surface of the screed must first be sealed, using an appropriate acrylic primer/ sealer. Contact SMET for advice on which to use.

General information
Features

High flowability, early trafficking, low shrinkage, reduced drying times

Uniclass 2015 Ready-mixed self-smoothing calcium sulfate screeds (Pr_35_31_06_72)
Specification data
Product Reference

CASEA RADDIPLUS T - Thermal Anhydrite Floor Screed Binder

Standard product features

Technical characteristics (to EN 13813: 2002):

  • Maximum thickness: 90 mm.
  • Minimum thickness: Bonded, 20 mm. Unbonded, 30 mm. Domestic, 35 mm. Commercial, 40 mm. Over underfloor heating pipes: 25 mm (BS 8204-7).
  • Use: Internal.
  • Compressive/ flexural strength: Class CAB 40, F7 EN 13454.
  • Spread diameter vs. Hagerman cone: 22–24 cm.
  • Open time as screed: 30–45 mins, depending on ambient conditions.
  • Light foot traffic: Approx. 24 hours depending on site conditions.
  • Partial Loading: Approx. 4 days depending on site conditions.
  • UFH commissioning: After approx. 4 days.
  • Reaction to fire: A1, Non-combustible.
  • pH-value: >9.
  • Bulk density: Approx. 1.2 kg/dm³.

Digital objects
PlatformCompatibleVersionCertified to
IFC
- 1 2.1
Revit
Revit 2017 1 2.1
Download now from NBS National BIM Library